EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Numerical Simulation and Analysis of Thermal Conductivity and Influencing Factors of Braided Carbon Fiber Reinforced Natural Rubber Composites

Zhongzhe Gao, Shuwei Zhao, Qunzhang Tu, Xinmin Shen, Qin Yin, Xiaocui Yang, Enshuai Wang, Wenqiang Peng, Xiangpo Zhang, Jinhong Xue

Crystals · 23.02.2025 · 15 (3) · 212

DOI: 10.3390/cryst15030212 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Crystals, online erschienen am 23.02.2025. Verfasst von Zhongzhe Gao und 9 weiteren Autor:innen. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 29 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Key R and D Program of China, National Natural Science Foundation of China, Natural Science Foundation of Jiangsu Province.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Rubber is widely applied in the field of electrical engineering due to its high elasticity. However, its poor thermal conductivity can cause localized overheating and eventual failure. This issue can be addressed through adding fillers with high thermal conductivity. In this study, natural rubber is selected as the matrix, while braided carbon fiber (B-CF), known for its excellent thermal conductivity, serves as the reinforcing phase. This research defines cubic Bessel curves, establishes a curvilinear coordinate system, and examines the orthogonal anisotropic thermal conductivity of B-CF bundles. It has been verified that eight cycles of fiber accurately represent the finite element simulation model. Based on this, the impact of the cross-sectional shape and area of the fiber bundle on heat dissipation was studied. The results show that the cross-sectional shape has minimal impact on heat dissipation, with temperature differences between the heat source center and the end of the cross-section line remaining within 1 °C. In contrast, the cross-sectional area significantly affects the reduction of the temperature, achieving reductions of up to 32.6% at the heat source center and 40.4% at the opposite side, respectively. This study provides valuable guidance for improving the thermal performance of braided fiber-reinforced rubber products.

Förderung

  • National Key R and D Program of China
  • National Natural Science Foundation of China
  • Natural Science Foundation of Jiangsu Province

Zitieren

APA

Gao, Z., Zhao, S., Tu, Q., Shen, X., Yin, Q., Yang, X., Wang, E., Peng, W., Zhang, X., & Xue, J. (2025). Numerical Simulation and Analysis of Thermal Conductivity and Influencing Factors of Braided Carbon Fiber Reinforced Natural Rubber Composites. Crystals, 15(3), 212. https://doi.org/10.3390/cryst15030212

Vancouver

Gao Z, Zhao S, Tu Q, Shen X, Yin Q, Yang X, et al. Numerical Simulation and Analysis of Thermal Conductivity and Influencing Factors of Braided Carbon Fiber Reinforced Natural Rubber Composites. Crystals. 2025;15(3):212. doi:10.3390/cryst15030212

BibTeX
@article{Gao2025,
  author = {Gao, Zhongzhe and Zhao, Shuwei and Tu, Qunzhang and Shen, Xinmin and Yin, Qin and Yang, Xiaocui and Wang, Enshuai and Peng, Wenqiang and Zhang, Xiangpo and Xue, Jinhong},
  title = {Numerical Simulation and Analysis of Thermal Conductivity and Influencing Factors of Braided Carbon Fiber Reinforced Natural Rubber Composites},
  journal = {Crystals},
  year = {2025},
  volume = {15},
  number = {3},
  pages = {212},
  doi = {10.3390/cryst15030212}
}
Kostenlos starten →