EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Microstructural, Mechanical, and Tribological Properties of Selective Laser Melted Inconel 718 Alloy: The Influences of Heat Treatment

Ümit Gencay Başcı, Egemen Avcu, Mertcan Kıraç, Ahmet Sever, İdris Gökalp, Hasan İsmail Yavuz, Serkan Oktay, Eray Abakay, Yasemin Yıldıran Avcu, Rıdvan Yamanoğlu

Crystals · 27.12.2024 · 15 (1) · 18

DOI: 10.3390/cryst15010018 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Crystals, online erschienen am 27.12.2024. Verfasst von Ümit Gencay Başcı und 9 weiteren Autor:innen. Die Arbeit wurde bisher 13-mal zitiert (Crossref) und nennt 66 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Scientific and Technological Research Council of Turkey (TUBITAK).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The present study investigates the microstructural, mechanical, and tribological properties of Inconel 718 alloy produced by selective laser melting (SLM) in relation to heat treatment. The SLM-processed samples received a two-step heat treatment: solutionizing at 1065 °C for 1 h, followed by double aging at 720 °C for 8 h and 620 °C for 6 h. The as-built sample exhibited a grain structure mostly characterized by fine Laves phases, while the hardening phases γ′ ((Ni3 (Al, Ti)) and γ″ (Ni3Nb) precipitated during the heat treatment. Following heat treatment, a transformation in crystallographic texture and dislocation density occurred, yielding a random texture and reduced dislocation density, particularly in the XZ direction, attributed to the formation of new grains via recrystallization in the microstructure. The grain size in the XY plane decreased following heat treatment, whereas the texture in the direction remained unaffected. The heat-treated samples had significantly higher tensile strength (1330 MPa vs. 960 MPa) and hardness (530 HV vs. 340 HV) relative to the as-built samples. The wear resistance of heat-treated samples surpassed that of the as-built sample due to enhanced mechanical properties resulting from the fine and dispersed γ′ and γ″ precipitates in the microstructure with heat treatment.

Förderung

  • Scientific and Technological Research Council of Turkey (TUBITAK)

Zitieren

APA

Başcı, Ü. G., Avcu, E., Kıraç, M., Sever, A., Gökalp, İ., Yavuz, H. İ., Oktay, S., Abakay, E., Avcu, Y. Y., & Yamanoğlu, R. (2024). Microstructural, Mechanical, and Tribological Properties of Selective Laser Melted Inconel 718 Alloy: The Influences of Heat Treatment. Crystals, 15(1), 18. https://doi.org/10.3390/cryst15010018

Vancouver

Başcı ÜG, Avcu E, Kıraç M, Sever A, Gökalp İ, Yavuz Hİ, et al. Microstructural, Mechanical, and Tribological Properties of Selective Laser Melted Inconel 718 Alloy: The Influences of Heat Treatment. Crystals. 2024;15(1):18. doi:10.3390/cryst15010018

BibTeX
@article{Bac2024,
  author = {Başcı, Ümit Gencay and Avcu, Egemen and Kıraç, Mertcan and Sever, Ahmet and Gökalp, İdris and Yavuz, Hasan İsmail and Oktay, Serkan and Abakay, Eray and Avcu, Yasemin Yıldıran and Yamanoğlu, Rıdvan},
  title = {Microstructural, Mechanical, and Tribological Properties of Selective Laser Melted Inconel 718 Alloy: The Influences of Heat Treatment},
  journal = {Crystals},
  year = {2024},
  volume = {15},
  number = {1},
  pages = {18},
  doi = {10.3390/cryst15010018}
}
Kostenlos starten →