Creep Behavior of a Single Crystal Nickel-Based Superalloy Containing High Concentrations of Re/Ru at an Intermediate Temperature
Crystals · 14.11.2024 · 14 (11) · 983
DOI: 10.3390/cryst14110983 ↗Kurz gefasst
Fachartikel in der Zeitschrift Crystals, online erschienen am 14.11.2024. Verfasst von Ning Tian und 4 weiteren Autor:innen. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 27 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Guizhou Province Science and Technology Plan Project, Sanmenxia City Science and Technology Bureau Science and Technology Research Project, Intelligent Transportation Equipment Manufacturing Technology Innovation Team Project.
Abstract (Originalsprache)
The deformation and damage mechanisms of a single crystal nickel-based superalloy containing 6.0%Re/5.0%Ru were studied through creep performance tests at 800 °C/860–880 MPa, microstructure and morphology observation, and dislocation configuration analyzation. It was found that, during the creep process at the intermediate temperature, the γ′ phase does not form a raft-like structure. After a creep fracture, the distortion degree of the cubic γ′ phase becomes greater when the observation region is closer to the fracture. The alloy has a long creep life at 800 °C, and the dislocation slipping or climbing in the γ matrix is the deformation mechanism at the early and middle creep stages. At the later creep stage, the γ′ phase is sheared by dislocations. Because of the low stacking-fault energy of the alloy, the superdislocation shearing into the γ′ phase can decompose on the {111} plane to form a (1/3) partial dislocation and stacking-fault configuration or cross-slip to the {100} plane to form the Kear–Wilsdorf (K-W) lock, which greatly improves the creep resistance of the alloy. At the later creep stage, the primary/secondary slip systems in the alloy are activated alternately, resulting in micro-cracks at the intersection of the two slip systems. As the creep progresses, the initiated cracks spread and propagate in the γ matrix phase along a direction normal to the stress axis and connect with each other until creep fracture occurs. This is the fracture mechanism of the alloy during creep at the medium temperature.
Förderung
- Guizhou Province Science and Technology Plan Project
- Sanmenxia City Science and Technology Bureau Science and Technology Research Project
- Intelligent Transportation Equipment Manufacturing Technology Innovation Team Project
- Natural science research project of the Education Department of Guizhou Province
- Guizhou Sci-Tech Cooperation Platform
Zitieren
APA
Tian, N., Meng, T., Sun, S., Zhang, S., & Dang, D. (2024). Creep Behavior of a Single Crystal Nickel-Based Superalloy Containing High Concentrations of Re/Ru at an Intermediate Temperature. Crystals, 14(11), 983. https://doi.org/10.3390/cryst14110983
Vancouver
Tian N, Meng T, Sun S, Zhang S, Dang D. Creep Behavior of a Single Crystal Nickel-Based Superalloy Containing High Concentrations of Re/Ru at an Intermediate Temperature. Crystals. 2024;14(11):983. doi:10.3390/cryst14110983
BibTeX
@article{Tian2024,
author = {Tian, Ning and Meng, Tai and Sun, Shulei and Zhang, Shunke and Dang, Danping},
title = {Creep Behavior of a Single Crystal Nickel-Based Superalloy Containing High Concentrations of Re/Ru at an Intermediate Temperature},
journal = {Crystals},
year = {2024},
volume = {14},
number = {11},
pages = {983},
doi = {10.3390/cryst14110983}
}
EUVIMED