EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Machine Learning to Predict Workability and Compressive Strength of Low- and High-Calcium Fly Ash–Based Geopolymers

Andrie Harmaji, Mira Chandra Kirana, Reza Jafari

Crystals · 24.09.2024 · 14 (10) · 830

DOI: 10.3390/cryst14100830 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Crystals, online erschienen am 24.09.2024. Verfasst von Andrie Harmaji und 2 weiteren Autor:innen. Die Arbeit wurde bisher 16-mal zitiert (Crossref) und nennt 61 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The potential substitution of Portland cement–based concrete with low- and high-calcium fly ash–based geopolymers was investigated. However, predicting the workability and compressive strength of geopolymers with the desired physical and mechanical properties is a complicated process because of the variety of chemical compositions found in aluminosilicate sources. Therefore, machine-learning techniques were used to predict the physical and mechanical properties of the geopolymers and eliminate the usual trial-and-error laboratory procedures. The experimental and predicted results of geopolymer properties using the multilayer perceptron regressor, voting regressor, and XGBoost techniques were compared. The XGBoost model outperformed the other models in terms of accuracy for predicting workability and compressive strength, producing the R2 of 0.96 and 0.89, respectively. Sensitivity analysis determined that the percentage of CaO had the largest effect on geopolymer workability of 27.13%. Fly ash content had the largest effect on compressive strength of 34.44%. Our approach offers a straightforward and dependable strategy for designing and optimizing fly ash–based geopolymers.

Zitieren

APA

Harmaji, A., Kirana, M. C., & Jafari, R. (2024). Machine Learning to Predict Workability and Compressive Strength of Low- and High-Calcium Fly Ash–Based Geopolymers. Crystals, 14(10), 830. https://doi.org/10.3390/cryst14100830

Vancouver

Harmaji A, Kirana MC, Jafari R. Machine Learning to Predict Workability and Compressive Strength of Low- and High-Calcium Fly Ash–Based Geopolymers. Crystals. 2024;14(10):830. doi:10.3390/cryst14100830

BibTeX
@article{Harmaji2024,
  author = {Harmaji, Andrie and Kirana, Mira Chandra and Jafari, Reza},
  title = {Machine Learning to Predict Workability and Compressive Strength of Low- and High-Calcium Fly Ash–Based Geopolymers},
  journal = {Crystals},
  year = {2024},
  volume = {14},
  number = {10},
  pages = {830},
  doi = {10.3390/cryst14100830}
}
Kostenlos starten →