Hydroxyapatite Reinforced Magnesium Alloy Composites Using the Ultrasonic-Assisted Rheo-Squeeze Casting Technique: Microstructural and Mechanical Performance Evaluation for Bone Fixture Applications
Crystals · 21.07.2024 · 14 (7) · 667
DOI: 10.3390/cryst14070667 ↗Kurz gefasst
Fachartikel in der Zeitschrift Crystals, online erschienen am 21.07.2024. Verfasst von Arunkumar Thirugnanasambandam und 5 weiteren Autor:innen. Die Arbeit wurde bisher 19-mal zitiert (Crossref) und nennt 28 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Centre for Sustainable Materials and Surface Metamorphosis, Chennai Institute of Technology, India.
Abstract (Originalsprache)
Magnesium-based biomaterials have recently been in the research spotlight in the field of biomedical engineering owing to their properties, such as density and biocompatibility that closely align with those of human bone. However, poor strength and rapid degradation impede their application as bone support fixtures. The present research aims to tailor the properties of Mg by using a novel ultrasonic-assisted rheo-squeeze casting approach. To satisfy the demand, pure Mg (Mg), MHA (Mg/5%HA), MZHA (Mg-1%Zn/5%HA/), and MSHA (Mg-1%Sn/5%HA) were fabricated, and various mechanical tests were conducted to assess the composite’s mechanical properties, including its microhardness, tensile strength, compressive strength, flexural strength, and impact strength. The microstructural and fractured morphology of the composites was examined by scanning electron microscopy (SEM), whereas their elemental composition was analyzed by field emission scanning electron microscopy (FESEM) equipped with elemental mapping. Comparing the MZHA, MHA, and pure Mg samples, the mechanical behavior of MSHA is significantly superior. This is due to composites containing Sn that possess finer-grained materials, which act as barriers to dislocation motion while increasing the strength of the materials. From the observed results, there is a significant improvement in the microhardness of MSHA of 64.5% when compared to that of pure Mg, and 42.7% compared to MHA. Furthermore, MSHA composites possess noticeable enhancements in tensile and compression performance of 80.8% and 58.3%, respectively, and 19% and 22.4% compared to MHA. Additionally, the impact and flexural performance of MSHA composites exhibit higher performance (41% and 42%) than pure Mg and 8% and 7% against the MHA composite.
Förderung
- Centre for Sustainable Materials and Surface Metamorphosis, Chennai Institute of Technology, India
Zitieren
APA
Thirugnanasambandam, A., Mohankumar, A., Botta, R. P. R., Chong, W. W. F., Thangamani, G., & Gupta, M. (2024). Hydroxyapatite Reinforced Magnesium Alloy Composites Using the Ultrasonic-Assisted Rheo-Squeeze Casting Technique: Microstructural and Mechanical Performance Evaluation for Bone Fixture Applications. Crystals, 14(7), 667. https://doi.org/10.3390/cryst14070667
Vancouver
Thirugnanasambandam A, Mohankumar A, Botta RPR, Chong WWF, Thangamani G, Gupta M. Hydroxyapatite Reinforced Magnesium Alloy Composites Using the Ultrasonic-Assisted Rheo-Squeeze Casting Technique: Microstructural and Mechanical Performance Evaluation for Bone Fixture Applications. Crystals. 2024;14(7):667. doi:10.3390/cryst14070667
BibTeX
@article{Thirugnanasambandam2024,
author = {Thirugnanasambandam, Arunkumar and Mohankumar, Ashokkumar and Botta, Rajendra Prasad Reddy and Chong, William Woei Fong and Thangamani, Geethapriyan and Gupta, Manoj},
title = {Hydroxyapatite Reinforced Magnesium Alloy Composites Using the Ultrasonic-Assisted Rheo-Squeeze Casting Technique: Microstructural and Mechanical Performance Evaluation for Bone Fixture Applications},
journal = {Crystals},
year = {2024},
volume = {14},
number = {7},
pages = {667},
doi = {10.3390/cryst14070667}
}
EUVIMED