EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Effect of Solution Annealing Time on the Microstructure and Mechanical Properties of Selective-Laser-Melted 2205 Duplex Stainless Steel

Huanhuan Li, Jinyuan Ma, Guang Li, Wenzhu Zhang, Xianheng Bao, Yu Shi

Crystals · 28.02.2024 · 14 (3) · 229

DOI: 10.3390/cryst14030229 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Crystals, online erschienen am 28.02.2024. Verfasst von Huanhuan Li und 5 weiteren Autor:innen. Die Arbeit wurde bisher 16-mal zitiert (Crossref) und nennt 55 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: central government guides’ local science and technology projects, Key Project of Research and Innovation in Universities, Scientific and Technological Projects of Jiayuguan.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The 2205 duplex stainless steel (DSS) produced by selective laser melting (SLM) exhibits high strength (1078.8 MPa) but poor plasticity (15.2%) owing to the high cooling rate during SLM, which inhibits the formation of austenite and creates a nearly entirely ferritic microstructure. The dual-phase nature can be restored through solution annealing, which enables well-matched strength and plasticity, but which has not been extensively studied. We investigate the effects of 5 min, 30 min, and 120 min of solution annealing at 1000 °C on the dual-phase ratio, grain size, texture strength, inclusions, grain boundary characteristics, and mechanical properties of SLM-manufactured 2205 DSS. After 30 min of solution annealing, the elongation increased to 32.2% owing to the restoration of the dual-phase structure, the reduction in dislocation density, the weakening of texture, and the decrease in grain size. Increasing solution annealing time also corresponded to a decrease in the ultimate tensile strength (from 831.7 to 787.5 MPa) and yield strength (from 610.3 to 507.8 MPa) due to grain coarsening and the gradual transformation of ferrite to austenite. Furthermore, the mechanism of the transformation from ferrite to austenite was proposed, and it was observed that the transformation of MnSiO3 to MnCrO4 provided nucleation sites for austenite.

Förderung

  • central government guides’ local science and technology projects
  • Key Project of Research and Innovation in Universities
  • Scientific and Technological Projects of Jiayuguan
  • Project of the National Natural Science Foundation of China
  • Gansu Provincial Science and Technology Plan

Zitieren

APA

Li, H., Ma, J., Li, G., Zhang, W., Bao, X., & Shi, Y. (2024). Effect of Solution Annealing Time on the Microstructure and Mechanical Properties of Selective-Laser-Melted 2205 Duplex Stainless Steel. Crystals, 14(3), 229. https://doi.org/10.3390/cryst14030229

Vancouver

Li H, Ma J, Li G, Zhang W, Bao X, Shi Y. Effect of Solution Annealing Time on the Microstructure and Mechanical Properties of Selective-Laser-Melted 2205 Duplex Stainless Steel. Crystals. 2024;14(3):229. doi:10.3390/cryst14030229

BibTeX
@article{Li2024,
  author = {Li, Huanhuan and Ma, Jinyuan and Li, Guang and Zhang, Wenzhu and Bao, Xianheng and Shi, Yu},
  title = {Effect of Solution Annealing Time on the Microstructure and Mechanical Properties of Selective-Laser-Melted 2205 Duplex Stainless Steel},
  journal = {Crystals},
  year = {2024},
  volume = {14},
  number = {3},
  pages = {229},
  doi = {10.3390/cryst14030229}
}
Kostenlos starten →