Investigation of Supercapacitor Electrodes Based on MIL-101(Fe) Metal-Organic Framework: Evaluating Electrochemical Performance through Hydrothermal and Microwave-Assisted Synthesis
Crystals · 28.10.2023 · 13 (11) · 1547
DOI: 10.3390/cryst13111547 ↗Kurz gefasst
Fachartikel in der Zeitschrift Crystals, online erschienen am 28.10.2023. Verfasst von Bhargav Akkinepally und 9 weiteren Autor:innen. Die Arbeit wurde bisher 34-mal zitiert (Crossref) und nennt 50 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: King Saud University.
Abstract (Originalsprache)
Supercapacitors have garnered substantial interest owing to their capacity to deliver power effectively for short-term applications. However, current supercapacitors suffer from limited stability and low-capacity storage. Metal-organic frameworks (MOFs) have emerged as a promising solution due to their high surface area and abundant active redox sites. MOF-based electrodes combined with aqueous based electrolytes have shown potential to enhance supercapacitor performance. While there is limited literature on MIL-101(Fe) MOF-based electrodes, a comparative study was conducted to investigate the supercapacitor performance of MIL-101(Fe) electrodes synthesized using hydrothermal and microwave-assisted processes. Processing parameters, such as the method used, alter the microstructure, morphology, and uniformity of supramolecular chemistry, impacting electrochemical characteristics. This study aimed to determine the active redox reactions, chemical stability, surface area, adsorption characteristics, and electrochemical characteristics of the electrodes. The electrodes from hydrothermal synthesis [MF(ht)] exhibited excellent electrochemical activity in comparison to the microwave-assisted [MF(m)] electrodes in the three-electrode configuration. At a high current density of 7 A/g, the MF(ht) electrode displayed a remarkable specific capacitance of 775.6 F/g and a good cyclic stability (82% @ 10 A/g) after 5000 galvanostatic charge–discharge cycles. At a current density of 1 A/g, the two-electrode configuration of MF(ht) yielded a high energy density of 74.7 Wh/kg at a power density of 2160 W/kg and a decent cyclic stability after 5000 cycles. The results suggest that the MF(ht) electrodes possess remarkable electrochemical properties that make them a promising candidate for advanced applications in energy storage.
Förderung
- King Saud University
Zitieren
APA
Akkinepally, B., Kumar, G. D., Reddy, I. N., Rao, H. J., Nagajyothi, P. C., Alothman, A. A., Alqahtani, K. N., Hassan, A. M., Javed, M. S., & Shim, J. (2023). Investigation of Supercapacitor Electrodes Based on MIL-101(Fe) Metal-Organic Framework: Evaluating Electrochemical Performance through Hydrothermal and Microwave-Assisted Synthesis. Crystals, 13(11), 1547. https://doi.org/10.3390/cryst13111547
Vancouver
Akkinepally B, Kumar GD, Reddy IN, Rao HJ, Nagajyothi PC, Alothman AA, et al. Investigation of Supercapacitor Electrodes Based on MIL-101(Fe) Metal-Organic Framework: Evaluating Electrochemical Performance through Hydrothermal and Microwave-Assisted Synthesis. Crystals. 2023;13(11):1547. doi:10.3390/cryst13111547
BibTeX
@article{Akkinepally2023,
author = {Akkinepally, Bhargav and Kumar, Gara Dheeraj and Reddy, I. Neelakanta and Rao, H. Jeevan and Nagajyothi, Patnamsetty Chidanandha and Alothman, Asma A. and Alqahtani, Khadraa N. and Hassan, Ahmed M. and Javed, Muhammad Sufyan and Shim, Jaesool},
title = {Investigation of Supercapacitor Electrodes Based on MIL-101(Fe) Metal-Organic Framework: Evaluating Electrochemical Performance through Hydrothermal and Microwave-Assisted Synthesis},
journal = {Crystals},
year = {2023},
volume = {13},
number = {11},
pages = {1547},
doi = {10.3390/cryst13111547}
}
EUVIMED