EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Alloying Element Depletion and Phase Transition in Stainless Steel 304 Induced by PEO Treatment in KOH- and TaOH-Rich Electrolyte

João Paulo de Proença, Rafael Parra Ribeiro, Elidiane Cipriano Rangel, Nilson Cristino da Cruz, Bruna de Oliveira Pinto, Carlos Roberto Grandini, Diego Rafael Nespeque Correa

Crystals · 11.10.2023 · 13 (10) · 1480

DOI: 10.3390/cryst13101480 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Crystals, online erschienen am 11.10.2023. Verfasst von João Paulo de Proença und 6 weiteren Autor:innen. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 32 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Brazilian National Council for Scientific and Technological Development (CNPq), São Paulo Research Foundation (FAPESP), Brazilian Nanotechnology National Laboratory (LNNano).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Due to their lower cost and good mechanical and corrosion properties, ferrous materials such as stainless steel (SS) are commonly used as bio-materials, mainly as surgical instruments and implants. Surface treatments such as plasma electrolytic oxidation (PEO) can be a valuable tool to increase corrosion resistance and enhance the bio-compatibility of metallic materials. In this scenario, the current study evaluated the effect of electrolyte composition on the surface of SS304 submitted to PEO treatment. The variation in the amount of KOH and Ta(OH)5 promoted significant changes in the surface characteristics, forming Fe-rich oxide plates, Ta-rich agglomerate particles, and an exposed substrate. The PEO-treated substrates were depleted of some alloying elements (Cr, Ni, and Mn), which, allied to the Ta-enrichment, affected the roughness, wettability, phase stability, micro-hardness, and corrosion resistance. All the PEO treatments presented a phase composition of single γ-Fe instead of a dual α + γ phase from the untreated substrate, which was understood in terms of the Nieq-Creq diagram. The corrosion tests indicated that the PEO treatment significantly affected the corrosion parameters, having the presence of a non-uniform oxide layer. The findings show that it is possible to control the chemical and phase composition of SS304 material employing PEO treatment.

Förderung

  • Brazilian National Council for Scientific and Technological Development (CNPq)
  • São Paulo Research Foundation (FAPESP)
  • Brazilian Nanotechnology National Laboratory (LNNano)

Zitieren

APA

Proença, J. P. D., Ribeiro, R. P., Rangel, E. C., Cruz, N. C. D., Pinto, B. D. O., Grandini, C. R., & Correa, D. R. N. (2023). Alloying Element Depletion and Phase Transition in Stainless Steel 304 Induced by PEO Treatment in KOH- and TaOH-Rich Electrolyte. Crystals, 13(10), 1480. https://doi.org/10.3390/cryst13101480

Vancouver

Proença JPD, Ribeiro RP, Rangel EC, Cruz NCD, Pinto BDO, Grandini CR, et al. Alloying Element Depletion and Phase Transition in Stainless Steel 304 Induced by PEO Treatment in KOH- and TaOH-Rich Electrolyte. Crystals. 2023;13(10):1480. doi:10.3390/cryst13101480

BibTeX
@article{Proena2023,
  author = {Proença, João Paulo de and Ribeiro, Rafael Parra and Rangel, Elidiane Cipriano and Cruz, Nilson Cristino da and Pinto, Bruna de Oliveira and Grandini, Carlos Roberto and Correa, Diego Rafael Nespeque},
  title = {Alloying Element Depletion and Phase Transition in Stainless Steel 304 Induced by PEO Treatment in KOH- and TaOH-Rich Electrolyte},
  journal = {Crystals},
  year = {2023},
  volume = {13},
  number = {10},
  pages = {1480},
  doi = {10.3390/cryst13101480}
}
Kostenlos starten →