Effect of the Cu/Mg Ratio on Mechanical Properties and Corrosion Resistance of Wrought Al–Cu–Mg–Ag Alloy
Crystals · 02.06.2023 · 13 (6) · 908
DOI: 10.3390/cryst13060908 ↗Kurz gefasst
Fachartikel in der Zeitschrift Crystals, online erschienen am 02.06.2023. Verfasst von Talal Talib Alshammari und 3 weiteren Autor:innen. Die Arbeit wurde bisher 11-mal zitiert (Crossref) und nennt 32 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: King Saud University.
Abstract (Originalsprache)
The present study aimed to investigate the influence of magnesium (Mg) on the mechanical properties and corrosion behavior of wrought Al–4Cu–xMg–0.6Ag alloys. The results from Optical Microscope, SEM, XRD analysis, and Thermo-Calc simulation were used to identify the microstructure formed after the aging process. Testing for hardness and tensile strength was conducted, in addition to corrosion testing. It was found that Mg significantly impacts the hardness of the alloys, with a high Mg content (low Cu/Mg ratio) increasing the hardness but reducing the tensile strength and ductility. This study attributed this to the formation of the S phase, which is dependent on both the quantity in the bulk and the size of the phase. The grain size was found to be finer with a higher Mg content, since the particle size inhibits grain growth during the artificial aging process. Counterintuitively, the corrosion activity was reduced in the high-Mg-content alloy due to its large particle size and the reduced galvanic cell effect. This study highlighted the importance of considering the effects of Mg on the mechanical properties and corrosion behavior of Al–Cu–Mg–Ag alloys.
Förderung
- King Saud University
Zitieren
APA
Alshammari, T. T., Ijaz, M. F., Alharbi, H. F., & Soliman, M. S. (2023). Effect of the Cu/Mg Ratio on Mechanical Properties and Corrosion Resistance of Wrought Al–Cu–Mg–Ag Alloy. Crystals, 13(6), 908. https://doi.org/10.3390/cryst13060908
Vancouver
Alshammari TT, Ijaz MF, Alharbi HF, Soliman MS. Effect of the Cu/Mg Ratio on Mechanical Properties and Corrosion Resistance of Wrought Al–Cu–Mg–Ag Alloy. Crystals. 2023;13(6):908. doi:10.3390/cryst13060908
BibTeX
@article{Alshammari2023,
author = {Alshammari, Talal Talib and Ijaz, Muhammad Farzik and Alharbi, Hamad F. and Soliman, Mahmoud S.},
title = {Effect of the Cu/Mg Ratio on Mechanical Properties and Corrosion Resistance of Wrought Al–Cu–Mg–Ag Alloy},
journal = {Crystals},
year = {2023},
volume = {13},
number = {6},
pages = {908},
doi = {10.3390/cryst13060908}
}
EUVIMED