The Reliability of the Complex Components under Temperature Cycling, Random Vibration, and Combined Loading for Airborne Applications
Crystals · 09.03.2023 · 13 (3) · 473
DOI: 10.3390/cryst13030473 ↗Kurz gefasst
Fachartikel in der Zeitschrift Crystals, online erschienen am 09.03.2023. Verfasst von Hao Cui und 6 weiteren Autor:innen. Die Arbeit wurde bisher 21-mal zitiert (Crossref) und nennt 24 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China.
Abstract (Originalsprache)
The electronic devices suffer great vibration and temperature fluctuation in an airborne environment, which has been always a big challenge for reliability design. In this paper, the reliability of the complex electronic components for airborne applications under a thermal cycling test, random vibration and combined loading has been investigated by experiment tests and finite element simulation. The fatigue life and failure location under different loadings have been compared and discussed, respectively. The results indicated that the combined fatigue life was much shorter than a single-factor experiment. The failed solder joints mostly appeared at the interface between the solder and the copper pad on the component side and the location was at the corner for all three harsh environment tests. Nevertheless, several differences could be observed. For temperature cycling, all the specimens failed due to the increase in daisy chain resistance rather than the open circuit for the combined loading test. That is because the degeneration of the solder caused by temperature variation led to lower stress levels and fatigue life. Moreover, the pins fractured at the welding regions have been observed. The modified Coffin—Manson model, Miner’s linear fatigue damage criterion and Steinberg’s model and rapid life-prediction approach were used to predict the fatigue life under temperature cycling, random vibration and combined loading, respectively. With these methods, the accurate numerical models could be developed and validated by experiment results. Thanks to the simulation, the design time could be effectively shortened and the weak point could be determined.
Förderung
- National Natural Science Foundation of China
Zitieren
APA
Cui, H., Tian, W., Xu, H., Wang, H., Huang, J., Peng, C., & Chen, Z. (2023). The Reliability of the Complex Components under Temperature Cycling, Random Vibration, and Combined Loading for Airborne Applications. Crystals, 13(3), 473. https://doi.org/10.3390/cryst13030473
Vancouver
Cui H, Tian W, Xu H, Wang H, Huang J, Peng C, et al. The Reliability of the Complex Components under Temperature Cycling, Random Vibration, and Combined Loading for Airborne Applications. Crystals. 2023;13(3):473. doi:10.3390/cryst13030473
BibTeX
@article{Cui2023,
author = {Cui, Hao and Tian, Wenchao and Xu, Hanyang and Wang, Heng and Huang, Jiabo and Peng, Chunxi and Chen, Zhiqiang},
title = {The Reliability of the Complex Components under Temperature Cycling, Random Vibration, and Combined Loading for Airborne Applications},
journal = {Crystals},
year = {2023},
volume = {13},
number = {3},
pages = {473},
doi = {10.3390/cryst13030473}
}
EUVIMED