EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Softening–Melting Properties and Slag Evolution of Vanadium Titano-Magnetite Sinter in Hydrogen-Rich Gases

Ran Xin, Jianbo Zhao, Xudong Gao, Zhixiong You, Wenzhou Yu, Shengfu Zhang, Jie Dang, Chenguang Bai

Crystals · 24.01.2023 · 13 (2) · 210

DOI: 10.3390/cryst13020210 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Crystals, online erschienen am 24.01.2023. Verfasst von Ran Xin und 7 weiteren Autor:innen. Die Arbeit wurde bisher 9-mal zitiert (Crossref) und nennt 25 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, National Key R&D Program of China, China Baowu Low Carbon Metallurgy Innovation Foudation.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Blast furnace–basic oxygen furnace (BF–BOF) process is the predominant method for smelting vanadium titano-magnetite (VTM) in China. Hydrogen-rich (H2-rich) gas injection in BF is considered as an important way to reduce CO2 emission under the background of low carbon metallurgy. In this paper, the softening–melting behaviors of VTM sinter in H2–rich gases were investigated by the method of determination of its reduction softening drippinger performance under load. The experimental results indicated that the permeability of VTM sinter during the softening–melting process was improved by increasing the H2 content of the reducing gases. The maximum pressure drop of the burden decreased gradually from 29.76 kPa to 19.97 kPa, and the total characteristic value (representing the comprehensive softening–melting property) also decreased obviously from 2357.52 kPa·°C to 630.94 kPa·°C with the increase in H2 content. The softening interval of the samples was widened, while the melting–dripping interval increased firstly and then decreased. In that case, the position of the melting–dripping zone in BF would move downwards, which was beneficial to smelting smoothly. The thermodynamic analysis indicated that Ti- and Fe-bearing phases were more difficult to be reduced than iron oxides, and H2-rich gas is beneficial to the reduction of that kind of oxides. Titano-magnetite will be reduced stepwise to form Fe2TiO4, and then in the order of FeTiO3→TiO2→Ti(C,N). Wustite (FeO) was an important component during the slag-forming process, whose content increased firstly and then decreased. Perovskite and silicate were the main phases in the dripping slag samples.

Förderung

  • National Natural Science Foundation of China
  • National Key R&D Program of China
  • China Baowu Low Carbon Metallurgy Innovation Foudation

Zitieren

APA

Xin, R., Zhao, J., Gao, X., You, Z., Yu, W., Zhang, S., Dang, J., & Bai, C. (2023). Softening–Melting Properties and Slag Evolution of Vanadium Titano-Magnetite Sinter in Hydrogen-Rich Gases. Crystals, 13(2), 210. https://doi.org/10.3390/cryst13020210

Vancouver

Xin R, Zhao J, Gao X, You Z, Yu W, Zhang S, et al. Softening–Melting Properties and Slag Evolution of Vanadium Titano-Magnetite Sinter in Hydrogen-Rich Gases. Crystals. 2023;13(2):210. doi:10.3390/cryst13020210

BibTeX
@article{Xin2023,
  author = {Xin, Ran and Zhao, Jianbo and Gao, Xudong and You, Zhixiong and Yu, Wenzhou and Zhang, Shengfu and Dang, Jie and Bai, Chenguang},
  title = {Softening–Melting Properties and Slag Evolution of Vanadium Titano-Magnetite Sinter in Hydrogen-Rich Gases},
  journal = {Crystals},
  year = {2023},
  volume = {13},
  number = {2},
  pages = {210},
  doi = {10.3390/cryst13020210}
}
Kostenlos starten →