A Priori Node Placement Using Chebyshev Polynomial Zeros for Non-Uniform Finite Element Meshing
Computation · 05.11.2026 · 14 (11) · 277
DOI: 10.3390/computation14110277 ↗Kurz gefasst
Fachartikel in der Zeitschrift Computation, online erschienen am 05.11.2026. Verfasst von Hind Es-Sady und 2 weiteren Autor:innen. Die Arbeit nennt 25 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
This study proposes a non-uniform meshing strategy for finite element (FE) discretization aimed at improving mechanical accuracy under controlled nodal budgets in structural analyses with localized field gradients. Unlike quasi-uniform meshing, the proposed approach uses a priori node placement based on the zeros of Chebyshev polynomials. Their natural clustering near the endpoints of [−1, 1] is mapped onto the physical domain to generate a non-uniform distribution by construction, without adaptive refinement or iterative remeshing. The main contribution therefore lies not in the Chebyshev points themselves, but in their use as a deterministic, solution-independent rule for placing the vertices of low-order FE meshes. Three meshing strategies are compared: quasi-uniform, graded, and Chebyshev-based meshes. The graded mesh deliberately concentrates nodes in predefined critical regions, whereas the Chebyshev-based mesh follows a predefined analytical placement rule. Performance is assessed against converged fine-mesh FE reference solutions using relative errors in displacement and von Mises stress, local and peak-stress errors, mesh-quality indicators, stiffness-matrix conditioning, and computational cost. For the two-hole plate at Ntot=2200 the relative displacement error decreases from 1.28×10−2 for the quasi-uniform mesh to 8.48×10−3 for the Chebyshev-based mesh, while the graded mesh reaches 7.75×10−3. Overall, the Chebyshev-based strategy improves displacement accuracy relative to quasi-uniform meshing in the investigated configurations, although the geometrically graded mesh generally achieves lower errors and improvements in stress accuracy are not systematic.
Zitieren
APA
Es-Sady, H., Moustabchir, H., & Sayyouri, M. (2026). A Priori Node Placement Using Chebyshev Polynomial Zeros for Non-Uniform Finite Element Meshing. Computation, 14(11), 277. https://doi.org/10.3390/computation14110277
Vancouver
Es-Sady H, Moustabchir H, Sayyouri M. A Priori Node Placement Using Chebyshev Polynomial Zeros for Non-Uniform Finite Element Meshing. Computation. 2026;14(11):277. doi:10.3390/computation14110277
BibTeX
@article{EsSady2026,
author = {Es-Sady, Hind and Moustabchir, Hassane and Sayyouri, Mhamed},
title = {A Priori Node Placement Using Chebyshev Polynomial Zeros for Non-Uniform Finite Element Meshing},
journal = {Computation},
year = {2026},
volume = {14},
number = {11},
pages = {277},
doi = {10.3390/computation14110277}
}
EUVIMED