EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Computational Investigation of Friction Stir Processing of Ti-6Al-4V Alloy for Biomedical Applications Using FEM and Taguchi Design

Nebojša Zdravković, Dragan S. Džunić, Živana Jovanovic Pešić, Dalibor Nikolić

Computation · 30.06.2026 · 14 (7) · 150

DOI: 10.3390/computation14070150 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Computation, online erschienen am 30.06.2026. Verfasst von Nebojša Zdravković und 3 weiteren Autor:innen. Die Arbeit nennt 19 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Ministry of Science, Technological Development and Innovation of the Republic of Serbia.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Friction stir processing (FSP) is an advanced solid-state surface modification technique for biomedical titanium alloys. This study presents a computational investigation of FSP applied to Ti-6Al-4V alloy through three-dimensional finite element modeling and Taguchi-based statistical optimization. A Taguchi L9 orthogonal array evaluated rotational speed (400–1000 rpm), traverse speed (50–100 mm/min), shoulder diameter (6–18 mm), and pin diameter (2–6 mm), reducing the required simulations from 81 (full factorial) to nine (88.9% reduction). A calibrated friction model (μ = 0.35/0.25/0.20 for 400/800/1000 rpm, F = 6000 N) yielded maximum temperatures of 870–1384 °C; all predicted temperatures remained below the melting point of Ti-6Al-4V (1660 °C). These values are consistent with experimentally reported ranges for FSW/FSP of Ti-6Al-4V. Traverse speed is the dominant parameter (ANOVA contribution: 63.1%, F = 10.44), followed by rotational speed (26.7%) and shoulder diameter (4.1%). Simulation 3 (400 rpm, 100 mm/min, Ds = 18 mm, T_max = 870 °C) appears to be the most promising thermal condition for preserving the fine-grained α + β microstructure, as it remains below the β-transus temperature (980 °C) throughout the processed zone.

Förderung

  • Ministry of Science, Technological Development and Innovation of the Republic of Serbia

Zitieren

APA

Zdravković, N., Džunić, D. S., Pešić, Ž. J., & Nikolić, D. (2026). Computational Investigation of Friction Stir Processing of Ti-6Al-4V Alloy for Biomedical Applications Using FEM and Taguchi Design. Computation, 14(7), 150. https://doi.org/10.3390/computation14070150

Vancouver

Zdravković N, Džunić DS, Pešić ŽJ, Nikolić D. Computational Investigation of Friction Stir Processing of Ti-6Al-4V Alloy for Biomedical Applications Using FEM and Taguchi Design. Computation. 2026;14(7):150. doi:10.3390/computation14070150

BibTeX
@article{Zdravkovi2026,
  author = {Zdravković, Nebojša and Džunić, Dragan S. and Pešić, Živana Jovanovic and Nikolić, Dalibor},
  title = {Computational Investigation of Friction Stir Processing of Ti-6Al-4V Alloy for Biomedical Applications Using FEM and Taguchi Design},
  journal = {Computation},
  year = {2026},
  volume = {14},
  number = {7},
  pages = {150},
  doi = {10.3390/computation14070150}
}
Kostenlos starten →