EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Enhancing the Efficiency of Solar Cells Based on TiO2 and ZnO Photoanodes Through Copper Oxide: A Comparative Study Using Vitis labrusca Extract and N3 Ruthenium Dye

Higor Oliveira da Cunha, Arcano Matheus Bragança Leite, Rajendran Suresh Babu, Hamilton Santos Gama Filho, Ramon Silva dos Santos, Marcelino José dos Anjos, Ana Lucia Ferreira de Barros

Colorants · 06.12.2024 · 3 (4) · 329-349

DOI: 10.3390/colorants3040023 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Colorants, online erschienen am 06.12.2024. Verfasst von Higor Oliveira da Cunha und 6 weiteren Autor:innen. Die Arbeit wurde bisher 13-mal zitiert (Crossref) und nennt 77 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: the Brazilian organizations, CAPES, FAPERJ.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study investigates the effects of varying CuO doping concentrations on the performance of titanium dioxide (TiO2)-based or zinc oxide (ZnO)-based dye-sensitized solar cells (DSSCs). TiO2 or ZnO mixed with CuO at different weight percentages (0–50 wt %) was employed as photoanodes in DSSCs, prepared via mechanical mixing. X-ray diffraction analysis revealed the structural changes, showing that as the CuO content increased in the hybrid, the CuO peaks (notably at 35.5° and 38.7°) became more prominent. Morphological and elemental characterizations were conducted using SEM and XRF, respectively. The solar cells were photosensitized by Vitis lasbrusca (V.L.) extract and N3 dye. The presence of anthocyanin molecules in the extracted V.L. was confirmed using UV-VIS and FTIR spectroscopy. The electrochemical characterization demonstrated optimal solar conversion efficiencies at a 20% doping level for both photosensitizers. Specifically, in the V.L. dye, TiO2-CuO achieved a conversion efficiency of 7.18%, and ZnO-CuO reached 5.77%. In the N3 dye, TiO2-CuO showed an efficiency of 11.34%, and ZnO-CuO, 9.55%. Notably, undoped photoanodes displayed a significantly lower photovoltaic performance: for V.L. dye, TiO2 showed 1.12% and ZnO 0.87%; for N3 dye, TiO2 showed 6.02% and ZnO 4.39%. Doping was therefore effective, yielding up to a seven-fold increase in performance in the case of V.L. with TiO2, compared to undoped DSSCs. The results demonstrate that using the hybrid photoanode led to a considerable increase in performance compared to using only TiO2 or ZnO photoanodes, highlighting the potential of DSSCs as sustainable energy sources.

Förderung

  • the Brazilian organizations
  • CAPES
  • FAPERJ

Zitieren

APA

Cunha, H. O. D., Leite, A. M. B., Babu, R. S., Filho, H. S. G., Santos, R. S. D., Anjos, M. J. D., & Barros, A. L. F. D. (2024). Enhancing the Efficiency of Solar Cells Based on TiO2 and ZnO Photoanodes Through Copper Oxide: A Comparative Study Using Vitis labrusca Extract and N3 Ruthenium Dye. Colorants, 3(4), 329-349. https://doi.org/10.3390/colorants3040023

Vancouver

Cunha HOD, Leite AMB, Babu RS, Filho HSG, Santos RSD, Anjos MJD, et al. Enhancing the Efficiency of Solar Cells Based on TiO2 and ZnO Photoanodes Through Copper Oxide: A Comparative Study Using Vitis labrusca Extract and N3 Ruthenium Dye. Colorants. 2024;3(4):329-349. doi:10.3390/colorants3040023

BibTeX
@article{Cunha2024,
  author = {Cunha, Higor Oliveira da and Leite, Arcano Matheus Bragança and Babu, Rajendran Suresh and Filho, Hamilton Santos Gama and Santos, Ramon Silva dos and Anjos, Marcelino José dos and Barros, Ana Lucia Ferreira de},
  title = {Enhancing the Efficiency of Solar Cells Based on TiO2 and ZnO Photoanodes Through Copper Oxide: A Comparative Study Using Vitis labrusca Extract and N3 Ruthenium Dye},
  journal = {Colorants},
  year = {2024},
  volume = {3},
  number = {4},
  pages = {329--349},
  doi = {10.3390/colorants3040023}
}
Kostenlos starten →