Selective Aggregation of Fine Spodumene from Quartz with Anionic Polyacrylamide Flocculant and Calcium Activator
Colloids and Interfaces · 11.06.2025 · 9 (3) · 36
DOI: 10.3390/colloids9030036 ↗Kurz gefasst
Fachartikel in der Zeitschrift Colloids and Interfaces, online erschienen am 11.06.2025. Verfasst von Danni Luo und 2 weiteren Autor:innen. Die Arbeit wurde bisher 7-mal zitiert (Crossref) und nennt 88 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Future Battery Industries Cooperative Research Centre, Australian Research Council for the ARC Centre of Excellence for Enabling Eco-Efficient Beneficiation of Minerals.
Abstract (Originalsprache)
Fine spodumene particles are challenging to treat by froth flotation and are often discarded. An approach to recover the lithium-bearing mineral is to selectively aggregate fine spodumene into larger sizes that are amenable to recovery by flotation. This research investigated the aggregation behaviour of spodumene and the gangue minerals K-feldspar and quartz, using commercially available anionic polyacrylamide flocculants. Calcium ions were used as activators that facilitated the selective adsorption of the carboxylate groups in the anionic flocculants onto the spodumene surface. The calcium ions decreased the magnitude of the negative zeta potential and reversed the zeta potential to positive for spodumene and K-feldspar, but not for quartz, below pH 10. Calcium concentrations of 312.5 g/t enhanced the adsorption of anionic polymers onto spodumene and K-feldspar, inducing aggregation, while quartz was aggregated only above 5000 g/t. Increasing the polymer concentration increased the aggregate size for spodumene and K-feldspar, but had little effect on quartz. In situ sizing and turbidity measurements indicated the optimal conditions for spodumene aggregation were 625 g/t of calcium and 63–84 g/t of the 58% anionic-charged polyacrylamide at pH 8.5. The sedimentation results showed limited separation due to quartz entrapment in the aggregates. Anionic polyacrylamide flocculants with calcium activators can aggregate fine spodumene particles.
Förderung
- Future Battery Industries Cooperative Research Centre
- Australian Research Council for the ARC Centre of Excellence for Enabling Eco-Efficient Beneficiation of Minerals
Zitieren
APA
Luo, D., Ng, W. S., & Franks, G. V. (2025). Selective Aggregation of Fine Spodumene from Quartz with Anionic Polyacrylamide Flocculant and Calcium Activator. Colloids and Interfaces, 9(3), 36. https://doi.org/10.3390/colloids9030036
Vancouver
Luo D, Ng WS, Franks GV. Selective Aggregation of Fine Spodumene from Quartz with Anionic Polyacrylamide Flocculant and Calcium Activator. Colloids and Interfaces. 2025;9(3):36. doi:10.3390/colloids9030036
BibTeX
@article{Luo2025,
author = {Luo, Danni and Ng, Wei Sung and Franks, George V.},
title = {Selective Aggregation of Fine Spodumene from Quartz with Anionic Polyacrylamide Flocculant and Calcium Activator},
journal = {Colloids and Interfaces},
year = {2025},
volume = {9},
number = {3},
pages = {36},
doi = {10.3390/colloids9030036}
}
EUVIMED