EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Effect of Sodium Tripolyphosphate on the Grinding and Separation of Copper–Tin Polymetallic Sulfide Ore

Xiaobo Liu, Qingfei Xiao, Mengtao Wang, Chao Zheng, Yiqi Cui, Saizhen Jin

Colloids and Interfaces · 02.11.2026 · 10 (6) · 80

DOI: 10.3390/colloids10060080 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Colloids and Interfaces, online erschienen am 02.11.2026. Verfasst von Xiaobo Liu und 5 weiteren Autor:innen. Die Arbeit nennt 46 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, Yunnan Fundamental Research Projects.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The complex mineral composition and heterogeneous intergrowth characteristics of copper–tin polymetallic sulfide ores make it difficult to obtain an appropriate particle-size distribution and sufficient mineral liberation during grinding, which can affect subsequent separation. This study investigated the effects of sodium tripolyphosphate (STPP) as a grinding aid on a copper–tin polymetallic sulfide ore from the Datun Plant in Gejiu, Yunnan, China. Grinding and separation tests, together with mineralogical and surface characterization using MapsMin, SEM-EDS, zeta-potential and contact-angle measurements, and DLVO/EDLVO calculations, were conducted to evaluate the effects of STPP on grinding and subsequent separation. The grinding results showed that, compared with the lime-only condition (0.10 wt% lime), the addition of 0.025 wt% STPP increased the proportion of the target size fraction (−0.15 + 0.019 mm) by 1.76%, without a marked increase in the fine fraction (−0.019 mm) or the coarse fraction (+0.15 mm). Compared with the lime-only condition, the addition of 0.025 wt% STPP increased the grade and recovery of the copper flotation concentrate by 0.20% and 3.54%, respectively, and those of the cassiterite gravity concentrate by 0.44% and 14.31%, respectively. The overall Sn recovery of the combined gravity separation and flotation process increased from 92.58% under the lime-only condition to 93.56% with the addition of 0.025 wt% STPP, but decreased to 92.39% when the STPP dosage was increased to 0.050 wt%. Automated mineralogical analysis showed that STPP addition increased the complete liberation degrees of cassiterite and bornite, while varying degrees of improvement were also observed for other major minerals. With the addition of 0.025 wt% STPP, the maximum particle size decreased from 820.95 to 495.30 μm, and D90 decreased from 374 to 237 μm relative to the lime-only condition. Surface characterization and DLVO/EDLVO analysis indicated that STPP altered mineral surface properties and interparticle interactions, which may have contributed to the observed changes in particle-size distribution and mineral liberation.

Förderung

  • National Natural Science Foundation of China
  • Yunnan Fundamental Research Projects

Zitieren

APA

Liu, X., Xiao, Q., Wang, M., Zheng, C., Cui, Y., & Jin, S. (2026). Effect of Sodium Tripolyphosphate on the Grinding and Separation of Copper–Tin Polymetallic Sulfide Ore. Colloids and Interfaces, 10(6), 80. https://doi.org/10.3390/colloids10060080

Vancouver

Liu X, Xiao Q, Wang M, Zheng C, Cui Y, Jin S. Effect of Sodium Tripolyphosphate on the Grinding and Separation of Copper–Tin Polymetallic Sulfide Ore. Colloids and Interfaces. 2026;10(6):80. doi:10.3390/colloids10060080

BibTeX
@article{Liu2026,
  author = {Liu, Xiaobo and Xiao, Qingfei and Wang, Mengtao and Zheng, Chao and Cui, Yiqi and Jin, Saizhen},
  title = {Effect of Sodium Tripolyphosphate on the Grinding and Separation of Copper–Tin Polymetallic Sulfide Ore},
  journal = {Colloids and Interfaces},
  year = {2026},
  volume = {10},
  number = {6},
  pages = {80},
  doi = {10.3390/colloids10060080}
}
Kostenlos starten →