EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Bitumen Extraction from Oil Sands via Targeted Emulsified Solvent Injection (TESI)

Aurelio Stammitti-Scarpone, Edgar Acosta

Colloids and Interfaces · 13.07.2026 · 10 (4) · 53

DOI: 10.3390/colloids10040053 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Colloids and Interfaces, online erschienen am 13.07.2026. Verfasst von Aurelio Stammitti-Scarpone und 1 weiteren Autor:innen. Die Arbeit nennt 42 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Natural Sciences and Engineering Research Council of Canada.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This work introduces a Targeted Emulsified-Solvent Injection (TESI) process for extracting bitumen from oil sands. In TESI, a solvent is emulsified near the emulsion phase inversion point (PIP), where the interfacial tension and the emulsion stability are very low. This allows the solvent to be easily emulsified and then deposited onto the bitumen-coated porous media (under lower shear conditions, where the emulsion breaks), mixing with bitumen, decreasing bitumen viscosity, and enabling mobilization and diluted bitumen recovery. The design of the surfactant-solvent formulation was guided by the Hydrophilic-Lipophilic-Difference and Net-Average-Curvature (HLD-NAC) frameworks. The HLD-NAC was used to identify a formulation with less than 1% surfactant exhibiting ultralow interfacial tension (~10−3 mJ/m2), at the PIP, where HLD = 0. This formulation was injected into columns packed with bitumen-coated sands at varying salinities and water-to-solvent ratios. Using optimal conditions, bitumen recoveries of up to 83% can be obtained at room temperature, without the need for steam or high-pressure injection, a condition suitable for intermediate-depth reservoirs. The effluent emulsion of diluted bitumen can be gravity-separated, allowing for the recycling of the aqueous solution containing the surfactant. The recovery curves were modeled using a continuous stirred tank reactor (CSTR) model coupled with a Capillary number model for thin viscous films that allowed the prediction of effluent diluted bitumen viscosities and an estimation of the pressure drops in the column that were consistent with experimental observations.

Förderung

  • Natural Sciences and Engineering Research Council of Canada

Zitieren

APA

Stammitti-Scarpone, A., & Acosta, E. (2026). Bitumen Extraction from Oil Sands via Targeted Emulsified Solvent Injection (TESI). Colloids and Interfaces, 10(4), 53. https://doi.org/10.3390/colloids10040053

Vancouver

Stammitti-Scarpone A, Acosta E. Bitumen Extraction from Oil Sands via Targeted Emulsified Solvent Injection (TESI). Colloids and Interfaces. 2026;10(4):53. doi:10.3390/colloids10040053

BibTeX
@article{StammittiScarpone2026,
  author = {Stammitti-Scarpone, Aurelio and Acosta, Edgar},
  title = {Bitumen Extraction from Oil Sands via Targeted Emulsified Solvent Injection (TESI)},
  journal = {Colloids and Interfaces},
  year = {2026},
  volume = {10},
  number = {4},
  pages = {53},
  doi = {10.3390/colloids10040053}
}
Kostenlos starten →