EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Solid Foams from Geopolymerization of Lunar Regolith Simulants Slurries

Michela Elena Pedretti, Libero Liggieri, Luca Valentini, Giovanna Canu, Alberto Lagazzo, Francesca Ravera, Eva Santini

Colloids and Interfaces · 16.04.2026 · 10 (2) · 29

DOI: 10.3390/colloids10020029 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Colloids and Interfaces, online erschienen am 16.04.2026. Verfasst von Michela Elena Pedretti und 6 weiteren Autor:innen. Die Arbeit nennt 62 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Agenzia Spaziale Italiana, Italian Ministry of University and Research.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Robust, lightweight, and thermally insulating building materials, developed according to the In Situ Resource Utilization (ISRU) paradigm, are essential for enabling Moon settlements. With this aim, we have investigated the formulation and characterization of porous geopolymeric materials based on a lunar regolith simulant, focusing on the influence of surfactants and rheology-modifying additives on pore structure and final material performance. As an optimized procedure, a pre-formed TTAB foam was, in fact, incorporated into the geopolymeric precursor slurries to achieve a suitable porosity. Then, the effects of three thickeners (xanthan gum, bentonite, and Actigel-208) were evaluated in view of the possible utilization for the production of building blocks by 3D printing. Observations of the pore structure after the geopolymeric consolidation of the slurries showed predominantly closed-cell networks across all formulations, with a pore morphology strongly dependent on the thickener used. Xanthan gum promoted high porosity but reduced mechanical integrity, whereas bentonite produced denser structures with higher thermal conductivity. Actigel-208 provided the most balanced performance, combining adequate porosity with improved strength. These findings demonstrate the potential of producing thermally insulating, structurally stable solid foams from lunar regolith simulants via a geopolymerization route.

Förderung

  • Agenzia Spaziale Italiana
  • Italian Ministry of University and Research

Zitieren

APA

Pedretti, M. E., Liggieri, L., Valentini, L., Canu, G., Lagazzo, A., Ravera, F., & Santini, E. (2026). Solid Foams from Geopolymerization of Lunar Regolith Simulants Slurries. Colloids and Interfaces, 10(2), 29. https://doi.org/10.3390/colloids10020029

Vancouver

Pedretti ME, Liggieri L, Valentini L, Canu G, Lagazzo A, Ravera F, et al. Solid Foams from Geopolymerization of Lunar Regolith Simulants Slurries. Colloids and Interfaces. 2026;10(2):29. doi:10.3390/colloids10020029

BibTeX
@article{Pedretti2026,
  author = {Pedretti, Michela Elena and Liggieri, Libero and Valentini, Luca and Canu, Giovanna and Lagazzo, Alberto and Ravera, Francesca and Santini, Eva},
  title = {Solid Foams from Geopolymerization of Lunar Regolith Simulants Slurries},
  journal = {Colloids and Interfaces},
  year = {2026},
  volume = {10},
  number = {2},
  pages = {29},
  doi = {10.3390/colloids10020029}
}
Kostenlos starten →