EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Comparison of Cracking Resistance Evaluation Methods for Asphalt Mixtures and Influence of Test Parameters

Feng Huang, Can Jiang, Binbin Wang, Desheng Yang, Feng Xiong, Ke Li, Xin Yuan, Haisheng Ren

Coatings · 18.11.2026 · 16 (11) · 1375

DOI: 10.3390/coatings16111375 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Coatings, online erschienen am 18.11.2026. Verfasst von Feng Huang und 7 weiteren Autor:innen. Die Arbeit nennt 36 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Science and Technology Projects of Xizang Autonomous Region, China.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Cracking is one of the primary distresses in asphalt pavements. To select an appropriate cracking resistance evaluation method and clarify the influence of test parameters on evaluation indices, three types of AC-13 asphalt mixtures—base, SBS-modified, and rubber-modified—were tested at −10 °C using the indirect tensile (IDT), beam bending (BBT), and semi-circular bending (SCB) tests. The methods were compared using peak load, tensile strength, and fracture work, and subsequently the effects of key test parameters on the evaluation indices were investigated. The results show that, under the present procedures, the IDT test exhibits anomalous fracture behavior, crushing beneath the loading strips, and contradictory rankings between peak load and fracture work, indicating limited reliability for the evaluated indices. The BBT and SCB tests yield consistent rankings (rubber-modified > SBS-modified > base asphalt), agreeing with BBR test results; however, under the present procedures, the SCB test offers better discrimination and allows field core sampling and is therefore regarded as the more suitable method among the three for the mixtures and conditions examined. Fracture toughness (KIC) and fracture energy (Gf) all decrease with increasing notch depth. KIC increases with increasing loading rate and decreases with increasing temperature. Gf increases with loading rate under ductile fracture but peaks at 15 °C under lower rates, with an interaction between loading rate and temperature. At ambient temperature, KIC is not a material constant and must be used under fixed temperature, loading rate, and notch depth. Accordingly, the conditions of 25 °C, 5 mm/min and a notch depth of 10–15 mm are proposed for the SCB test, subject to further validation. The findings provide a reference for selecting cracking resistance evaluation methods and optimizing test conditions.

Förderung

  • Science and Technology Projects of Xizang Autonomous Region, China

Zitieren

APA

Huang, F., Jiang, C., Wang, B., Yang, D., Xiong, F., Li, K., Yuan, X., & Ren, H. (2026). Comparison of Cracking Resistance Evaluation Methods for Asphalt Mixtures and Influence of Test Parameters. Coatings, 16(11), 1375. https://doi.org/10.3390/coatings16111375

Vancouver

Huang F, Jiang C, Wang B, Yang D, Xiong F, Li K, et al. Comparison of Cracking Resistance Evaluation Methods for Asphalt Mixtures and Influence of Test Parameters. Coatings. 2026;16(11):1375. doi:10.3390/coatings16111375

BibTeX
@article{Huang2026,
  author = {Huang, Feng and Jiang, Can and Wang, Binbin and Yang, Desheng and Xiong, Feng and Li, Ke and Yuan, Xin and Ren, Haisheng},
  title = {Comparison of Cracking Resistance Evaluation Methods for Asphalt Mixtures and Influence of Test Parameters},
  journal = {Coatings},
  year = {2026},
  volume = {16},
  number = {11},
  pages = {1375},
  doi = {10.3390/coatings16111375}
}
Kostenlos starten →