EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Effect of Ni Interlayer Thickness on the Corrosion Resistance of DLC Coatings on Al Bipolar Plates for PEMFCs

Xuan Zhang, Min Zhang, Jinhao Guo, Xin Cai, Lin Zhang

Coatings · 16.11.2026 · 16 (11) · 1365

DOI: 10.3390/coatings16111365 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Coatings, online erschienen am 16.11.2026. Verfasst von Xuan Zhang und 4 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Aluminium alloys are attractive candidates for bipolar plates in proton-exchange membrane fuel cells (PEMFCs) because of their low density, high thermal conductivity and excellent formability. Their rapid corrosion in the acidic fuel-cell environment, however, severely limits practical application. Diamond-like carbon (DLC) coatings offer an effective combination of corrosion resistance and electrical conductivity, yet adhesion to aluminium is often insufficient; metallic interlayers such as Ni are therefore routinely introduced. The systematic influence of Ni interlayer thickness on the overall corrosion performance of the resulting multilayer system remains poorly quantified. In this work, Ni interlayers of controlled thickness were electrodeposited on Al substrates, followed by physical-vapour deposition of DLC to produce Al/Ni/DLC coatings. The microstructure and corrosion behaviour of the coatings were characterised by Raman spectroscopy, potentiodynamic polarisation, electrochemical impedance spectroscopy (EIS), Mott–Schottky analysis and scanning electron microscopy. The DLC top layer substantially improves the corrosion resistance of the Al substrate by reducing the corrosion current density and increasing the polarisation resistance. Among the three thicknesses tested, an intermediate Ni thickness (1.5 μm) gives the lowest corrosion current density and the highest polarisation resistance and charge-transfer resistance. Conversely, increasing the Ni thickness to 20 μm results in a deterioration of the electrochemical protection, which is associated with a less uniform interfacial morphology and a pronounced low-frequency diffusion contribution in the impedance response. These findings demonstrate that precise control of Ni interlayer thickness is critical for simultaneously optimizing microstructure and corrosion resistance of Al/Ni/DLC coatings under PEMFC operating conditions.

Zitieren

APA

Zhang, X., Zhang, M., Guo, J., Cai, X., & Zhang, L. (2026). Effect of Ni Interlayer Thickness on the Corrosion Resistance of DLC Coatings on Al Bipolar Plates for PEMFCs. Coatings, 16(11), 1365. https://doi.org/10.3390/coatings16111365

Vancouver

Zhang X, Zhang M, Guo J, Cai X, Zhang L. Effect of Ni Interlayer Thickness on the Corrosion Resistance of DLC Coatings on Al Bipolar Plates for PEMFCs. Coatings. 2026;16(11):1365. doi:10.3390/coatings16111365

BibTeX
@article{Zhang2026,
  author = {Zhang, Xuan and Zhang, Min and Guo, Jinhao and Cai, Xin and Zhang, Lin},
  title = {Effect of Ni Interlayer Thickness on the Corrosion Resistance of DLC Coatings on Al Bipolar Plates for PEMFCs},
  journal = {Coatings},
  year = {2026},
  volume = {16},
  number = {11},
  pages = {1365},
  doi = {10.3390/coatings16111365}
}
Kostenlos starten →