Fabrication and Tribological Properties of Ni60 Matrix Solid-Lubricating Composites over a Broad Temperature Range
Coatings · 12.11.2026 · 16 (11) · 1345
DOI: 10.3390/coatings16111345 ↗Kurz gefasst
Fachartikel in der Zeitschrift Coatings, online erschienen am 12.11.2026. Verfasst von Xue Cao und 4 weiteren Autor:innen. Die Arbeit nennt 21 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Gansu Province Science and Technology Project—Key Project of Joint Research Fund.
Abstract (Originalsprache)
Ni60 matrix self-lubricating composites (Ni60-MoS2-SrSO4-Cr2O3-BaF2/CaF2) were successfully prepared via cold briquetting combined with vacuum sintering. The wide-temperature tribological behaviors of the fabricated composites against Si3N4 ceramic balls were systematically evaluated from room temperature (RT) to 800 °C, with a particular focus on clarifying the influence of SrSO4 content on friction and wear performance. The results reveal that the composite doped with 10 wt% SrSO4 delivers excellent comprehensive lubrication and wear resistance over a broad temperature range. Benefiting from the synergistic lubrication of multi-phase solid lubricants, this optimized composite maintains a stable and low friction coefficient ranging from 0.150 to 0.380, and its wear rate varies steadily from 9.15·10−5 to 4.79·10−4 mm3/(N·m) at different temperatures. Tribochemical analysis confirms that the in-situ generated SrMoO4 lubricating phase is formed on the worn surface during high-temperature friction, which is responsible for the remarkably reduced friction coefficient and optimal tribological performance of the composite at 600 °C. This study demonstrates that the designed multi-component Ni60 self-lubricating composites possess excellent wide-temperature tribological stability and exhibit great application potential for extreme-temperature friction service environments.
Förderung
- Gansu Province Science and Technology Project—Key Project of Joint Research Fund
Zitieren
APA
Cao, X., Xiao, R., Jia, J., Chen, H., & Dai, E. (2026). Fabrication and Tribological Properties of Ni60 Matrix Solid-Lubricating Composites over a Broad Temperature Range. Coatings, 16(11), 1345. https://doi.org/10.3390/coatings16111345
Vancouver
Cao X, Xiao R, Jia J, Chen H, Dai E. Fabrication and Tribological Properties of Ni60 Matrix Solid-Lubricating Composites over a Broad Temperature Range. Coatings. 2026;16(11):1345. doi:10.3390/coatings16111345
BibTeX
@article{Cao2026,
author = {Cao, Xue and Xiao, Rongzhen and Jia, Jinfeng and Chen, Hanfeng and Dai, Enhao},
title = {Fabrication and Tribological Properties of Ni60 Matrix Solid-Lubricating Composites over a Broad Temperature Range},
journal = {Coatings},
year = {2026},
volume = {16},
number = {11},
pages = {1345},
doi = {10.3390/coatings16111345}
}
EUVIMED