EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

The Influence of Ambient Temperature and Liquid Water Content on Electrothermal De-Icing Characteristics of a Wind Turbine Blade Airfoil

Weirong Lin, Chuanxi Wang, Ruxin Zheng, Tong Wu, Chong Jiao, Ting Zhang, Longqing Zhu, Yubo Shao, Haohui Dong, Zhi Xu, Yan Li

Coatings · 29.10.2026 · 16 (11) · 1287

DOI: 10.3390/coatings16111287 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Coatings, online erschienen am 29.10.2026. Verfasst von Weirong Lin und 10 weiteren Autor:innen. Die Arbeit nennt 38 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Research and Application of Key Technologies for High-Efficiency Anti-icing and De-icing of Wind Turbine Blades of China Huaneng Group, National Natural Science Foundation of China, Key Laboratory of Icing and Anti/De-icing of CARDC.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Icing on wind turbine blades affects power-generation efficiency. Therefore, it is crucial to provide ice protection for wind turbine blades. This paper investigates how ambient temperature and liquid water content affect the formation and downstream evolution of runback ice during electrothermal de-icing of a wind turbine blade airfoil by numerical simulation. A coupled numerical model integrating external airflow, droplet collection, ice accretion, and unsteady heat conduction is established based on FENSAP-ICE. The simulated temperature agrees well with the experimental data, with an absolute maximum error of 2.02 K and an RMSE of 1.75 K, indicating that the model accurately captures the transient thermal response of the electrothermal de-icing system. The results indicate that after 20 s, the leading-edge ice completely disappears at 268 K, while 0.21 mm of residual ice remains at 258 K. Over the investigated LWC range of 0.5–1.5 g·m−3, a change in trend is observed: the runback ice thickness does not increase proportionally with LWC, suggesting that local freezing capacity may become increasingly important at higher LWC. Furthermore, the freezing front is not stationary but migrates continuously downstream as ambient temperature increases and de-icing proceeds, and the migration rate is higher in the 263–268 K range than in the 258–263 K range. These findings provide qualitative insight for anti/de-icing strategy.

Förderung

  • Research and Application of Key Technologies for High-Efficiency Anti-icing and De-icing of Wind Turbine Blades of China Huaneng Group
  • National Natural Science Foundation of China
  • Key Laboratory of Icing and Anti/De-icing of CARDC

Zitieren

APA

Lin, W., Wang, C., Zheng, R., Wu, T., Jiao, C., Zhang, T., Zhu, L., Shao, Y., Dong, H., Xu, Z., & Li, Y. (2026). The Influence of Ambient Temperature and Liquid Water Content on Electrothermal De-Icing Characteristics of a Wind Turbine Blade Airfoil. Coatings, 16(11), 1287. https://doi.org/10.3390/coatings16111287

Vancouver

Lin W, Wang C, Zheng R, Wu T, Jiao C, Zhang T, et al. The Influence of Ambient Temperature and Liquid Water Content on Electrothermal De-Icing Characteristics of a Wind Turbine Blade Airfoil. Coatings. 2026;16(11):1287. doi:10.3390/coatings16111287

BibTeX
@article{Lin2026,
  author = {Lin, Weirong and Wang, Chuanxi and Zheng, Ruxin and Wu, Tong and Jiao, Chong and Zhang, Ting and Zhu, Longqing and Shao, Yubo and Dong, Haohui and Xu, Zhi and Li, Yan},
  title = {The Influence of Ambient Temperature and Liquid Water Content on Electrothermal De-Icing Characteristics of a Wind Turbine Blade Airfoil},
  journal = {Coatings},
  year = {2026},
  volume = {16},
  number = {11},
  pages = {1287},
  doi = {10.3390/coatings16111287}
}
Kostenlos starten →