EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Wiper-Assisted High-Speed Milling of Al7136 Aluminum Alloy: Machining Performance, Multidimensional Surface Integrity, and Implications for Coating Readiness

Alina Bianca Pop, Cornel Cristian Florian, Cristian Barz, Jozsef Juhasz, Aurel Mihail Țîțu, Daniel Danci

Coatings · 23.10.2026 · 16 (11) · 1262

DOI: 10.3390/coatings16111262 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Coatings, online erschienen am 23.10.2026. Verfasst von Alina Bianca Pop und 5 weiteren Autor:innen. Die Arbeit nennt 74 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

High-speed milling of aerospace aluminum alloys requires process strategies that reconcile productivity with functionally acceptable surface integrity. This review critically evaluates Wiper-assisted machining with emphasis on Al7136 by separating two evidence classes: direct alloy-specific findings obtained on Al7136 and transferable findings derived from other aluminum alloys, materials, and machining processes. The direct Al7136 literature is limited and predominantly roughness-centred, whereas most current evidence concerning Wiper geometry, feed-mark attenuation, force response, wear, and productivity originates from transferable studies. These studies clarify plausible mechanisms but do not constitute direct validation of Wiper-assisted high-speed milling in Al7136. Reported reductions in Ra demonstrate average geometric smoothing only and cannot independently establish improved aerospace performance. A geometrically smoother surface may still contain smeared material, adhesion-related defects, isolated valleys, particle pull-out, or microcracks and may coexist with subsurface plastic deformation, microhardness changes, and altered residual-stress gradients. Such conditions can influence coating adhesion, bonding performance, corrosion resistance, fatigue resistance, and dimensional stability even when Ra is low. Multidimensional surface-integrity assessment and function-oriented validation therefore remain major Al7136-specific research gaps. The proposed mechanism-based framework is intended to address the absence of direct evidence linking Wiper microgeometry, alloy condition, machining stability, tool wear, surface and subsurface integrity, and downstream aerospace requirements. It prioritizes coordinated topographical, mechanical, microstructural, and interfacial characterization followed by application-relevant functional testing. Implementing this roadmap could establish alloy-specific causal evidence, support robust process windows, reduce qualification uncertainty, and determine whether higher-productivity Wiper finishing is compatible with coating, bonding, corrosion, fatigue, and dimensional-stability requirements. Wiper-assisted milling should consequently be regarded as a promising but condition-dependent strategy requiring direct experimental validation in Al7136 rather than extrapolation from transferable evidence alone.

Zitieren

APA

Pop, A. B., Florian, C. C., Barz, C., Juhasz, J., Țîțu, A. M., & Danci, D. (2026). Wiper-Assisted High-Speed Milling of Al7136 Aluminum Alloy: Machining Performance, Multidimensional Surface Integrity, and Implications for Coating Readiness. Coatings, 16(11), 1262. https://doi.org/10.3390/coatings16111262

Vancouver

Pop AB, Florian CC, Barz C, Juhasz J, Țîțu AM, Danci D. Wiper-Assisted High-Speed Milling of Al7136 Aluminum Alloy: Machining Performance, Multidimensional Surface Integrity, and Implications for Coating Readiness. Coatings. 2026;16(11):1262. doi:10.3390/coatings16111262

BibTeX
@article{Pop2026,
  author = {Pop, Alina Bianca and Florian, Cornel Cristian and Barz, Cristian and Juhasz, Jozsef and Țîțu, Aurel Mihail and Danci, Daniel},
  title = {Wiper-Assisted High-Speed Milling of Al7136 Aluminum Alloy: Machining Performance, Multidimensional Surface Integrity, and Implications for Coating Readiness},
  journal = {Coatings},
  year = {2026},
  volume = {16},
  number = {11},
  pages = {1262},
  doi = {10.3390/coatings16111262}
}
Kostenlos starten →