EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Optimization of Cutting Parameters Based on the Response Surface Method to Minimize Cutting Forces During Bamboo Milling

Yanhe Liu, Zhaolong Zhu, Jianbo Zhou, Bin Zhang

Coatings · 17.08.2026 · 16 (8) · 977

DOI: 10.3390/coatings16080977 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Coatings, online erschienen am 17.08.2026. Verfasst von Yanhe Liu und 3 weiteren Autor:innen. Die Arbeit nennt 21 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Fundamental Research Funds for the Central Public-interest Scientific Institution of the Chinese Academy of Forestry.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In the manufacturing industry, cutting force is the primary factor affecting bamboo milling. Excessive cutting force can increase tool wear and affect processing quality, processing energy consumption, and processing stability. Cutting parameters have significant impacts on cutting forces. The cutting force is also one of the important indexes for evaluating machining performance. This article uses response surface methodology to study the influence of different cutting parameters on the cutting force during the bamboo milling process. Moreover, the importance of cutting parameters to cutting forces was determined by variance analysis, corresponding mathematical models were established, and the interaction between cutting parameters and cutting forces was analyzed to optimize the bamboo milling process. On this basis, the cutting parameter combination corresponding to the optimal milling process under experimental conditions was determined and experimentally verified. The prediction accuracy was high and the test optimization was good. Therefore, the proposed method can be used to predict and optimize the actual cutting force, providing a scientific basis for high-quality processing of bamboo milling.

Förderung

  • Fundamental Research Funds for the Central Public-interest Scientific Institution of the Chinese Academy of Forestry

Zitieren

APA

Liu, Y., Zhu, Z., Zhou, J., & Zhang, B. (2026). Optimization of Cutting Parameters Based on the Response Surface Method to Minimize Cutting Forces During Bamboo Milling. Coatings, 16(8), 977. https://doi.org/10.3390/coatings16080977

Vancouver

Liu Y, Zhu Z, Zhou J, Zhang B. Optimization of Cutting Parameters Based on the Response Surface Method to Minimize Cutting Forces During Bamboo Milling. Coatings. 2026;16(8):977. doi:10.3390/coatings16080977

BibTeX
@article{Liu2026,
  author = {Liu, Yanhe and Zhu, Zhaolong and Zhou, Jianbo and Zhang, Bin},
  title = {Optimization of Cutting Parameters Based on the Response Surface Method to Minimize Cutting Forces During Bamboo Milling},
  journal = {Coatings},
  year = {2026},
  volume = {16},
  number = {8},
  pages = {977},
  doi = {10.3390/coatings16080977}
}
Kostenlos starten →