EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Processing and Tribological Behavior of Graphene Oxide Nanoplates Reinforced UHMWPE Composites

Yang Liu, Jing Li, Kaibao Wang, Huirong Le

Coatings · 14.08.2026 · 16 (8) · 970

DOI: 10.3390/coatings16080970 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Coatings, online erschienen am 14.08.2026. Verfasst von Yang Liu und 3 weiteren Autor:innen. Die Arbeit nennt 32 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Chinese Ministry of Science and Technology.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Ultra-high molecular weight polyethylene (UHMWPE) is the preferred bearing material for total knee arthroplasty, yet its limited service life (15–20 years) remains a clinical challenge. This study investigates graphene oxide (GO) nanoplatelets as reinforcing fillers to enhance the mechanical and tribological performance of UHMWPE for longer-lasting implants. GO/UHMWPE composites with 0–1 wt% GO were fabricated via solution blending and hot compression molding. Direct SEM imaging combined with oxygen elemental mapping confirmed uniform GO dispersion up to 0.5 wt%, whereas higher loadings induced agglomeration. Dynamic mechanical analysis showed that the storage modulus at 37 °C increased with GO content, peaking at 0.5 wt% (improved by ~28% over neat UHMWPE), then decreased due to aggregation. Tribological tests under dry reciprocating sliding revealed that GO progressively reduced the wear rate (up to ~45% at 1.0 wt%), but also raised the steady-state friction coefficient from 0.13 to 0.19, attributed to molecular chain anchoring. The optimal balance of enhanced stiffness and wear resistance, with only a marginal friction increase, was achieved at 0.5 wt% GO. The reinforcement mechanism involves efficient stress transfer to rigid GO sheets and reduced surface peeling. This work provides a robust processing route and direct dispersion evidence, offering practical guidance for designing high-performance UHMWPE composites for orthopedic applications.

Förderung

  • Chinese Ministry of Science and Technology

Zitieren

APA

Liu, Y., Li, J., Wang, K., & Le, H. (2026). Processing and Tribological Behavior of Graphene Oxide Nanoplates Reinforced UHMWPE Composites. Coatings, 16(8), 970. https://doi.org/10.3390/coatings16080970

Vancouver

Liu Y, Li J, Wang K, Le H. Processing and Tribological Behavior of Graphene Oxide Nanoplates Reinforced UHMWPE Composites. Coatings. 2026;16(8):970. doi:10.3390/coatings16080970

BibTeX
@article{Liu2026,
  author = {Liu, Yang and Li, Jing and Wang, Kaibao and Le, Huirong},
  title = {Processing and Tribological Behavior of Graphene Oxide Nanoplates Reinforced UHMWPE Composites},
  journal = {Coatings},
  year = {2026},
  volume = {16},
  number = {8},
  pages = {970},
  doi = {10.3390/coatings16080970}
}
Kostenlos starten →