Enhancement of Strength and Ductility in STS304/1050Al/STS304 Composite Plates by Controlling Hot-Rolling Speed
Coatings · 12.08.2026 · 16 (8) · 955
DOI: 10.3390/coatings16080955 ↗Kurz gefasst
Fachartikel in der Zeitschrift Coatings, online erschienen am 12.08.2026. Verfasst von Rui Hao und 3 weiteren Autor:innen. Die Arbeit nennt 21 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
This study investigates the effect of hot-rolling speed on the microstructure and mechanical properties of STS304/1050Al/STS304 (304 stainless steel/1050 aluminum alloy/304 stainless steel) three-layer composite plates. The results show that as rolling speed increases, the tensile strength increases from 300.3 MPa to 366.2 MPa and the elongation after fracture increases from 42.96% to 50.56%, achieving simultaneous improvement in strength and ductility. At high rolling speeds, the strengthening of the STS304 layer is attributed to deformation-induced martensitic transformation and dislocation multiplication (17.2% increase in tensile strength), while the softening of the Al1050 layer is predominantly attributed to dynamic recovery (37.3% increase in elongation after fracture), which contributes to a synergistic “steel strengthening and aluminum softening” effect. The rightward shift in the intersection point on the work-hardening rate curves indicates enhanced uniform deformation capacity, and the coarsening of dimples on fracture surfaces is consistent with ductile fracture mechanisms. Appropriately increasing the hot-rolling speed represents an effective process route for optimizing the strength–ductility synergy of such steel/aluminum composite plates.
Zitieren
APA
Hao, R., Wang, L., Wang, R., & Chen, N. (2026). Enhancement of Strength and Ductility in STS304/1050Al/STS304 Composite Plates by Controlling Hot-Rolling Speed. Coatings, 16(8), 955. https://doi.org/10.3390/coatings16080955
Vancouver
Hao R, Wang L, Wang R, Chen N. Enhancement of Strength and Ductility in STS304/1050Al/STS304 Composite Plates by Controlling Hot-Rolling Speed. Coatings. 2026;16(8):955. doi:10.3390/coatings16080955
BibTeX
@article{Hao2026,
author = {Hao, Rui and Wang, Lianbo and Wang, Rui and Chen, Nianhua},
title = {Enhancement of Strength and Ductility in STS304/1050Al/STS304 Composite Plates by Controlling Hot-Rolling Speed},
journal = {Coatings},
year = {2026},
volume = {16},
number = {8},
pages = {955},
doi = {10.3390/coatings16080955}
}
EUVIMED