EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Molten Pool Dynamics and Sidewall Lack-of-Fusion Formation Mechanism in Narrow-Gap Welding of Thick TC4 Alloy

Qianli Liu, Yingshang Zhao, Haibin Liu, Jingyu Liu, Wenyong Zhao, Guoxiang Xu

Coatings · 29.07.2026 · 16 (8) · 904

DOI: 10.3390/coatings16080904 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Coatings, online erschienen am 29.07.2026. Verfasst von Qianli Liu und 5 weiteren Autor:innen. Die Arbeit nennt 41 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: 2025 Provincial Special Fund-Project for Industrial Foundation Rebuilding, National Major Projects of China, National Natural Science Foundation of China.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In this study, a three-dimensional transient multi-physics coupled numerical model of narrow-gap tungsten inert gas (TIG) welding of TC4 alloy is established, and the heat transfer, flow behavior of the liquid metal in the molten pool, and the formation mechanism of sidewall lack-of-fusion defects are quantitatively investigated. The results show that, along the groove width direction, the temperature and flow velocity of the liquid metal gradually decrease from the center toward the sidewall. Along the welding direction, the fluid velocity presents multi-peak fluctuation characteristics. As the weld pass increases, the maximum velocity of the liquid metal significantly increases, enhancing the overall fluidity of the molten pool, and the temperature distribution becomes more uniform due to the weakened geometric constraints of the sidewall and the inter-pass heat accumulation effect. Furthermore, excessively high welding speeds (0.2 m/min) or insufficient welding currents (150 A) drastically reduce the per-unit-length heat input, resulting in diminished molten pool volume and decreased maximum liquid metal velocities of 0.075 m/s and 0.1 m/s, respectively. Under these conditions, lateral driving forces generated by the Marangoni effect are insufficient to overcome the viscous resistance of the molten metal. Consequently, the liquid metal solidifies prior to reaching the sidewall, inducing pronounced sidewall lack-of-fusion defects and localized humping on the weld top surface.

Förderung

  • 2025 Provincial Special Fund-Project for Industrial Foundation Rebuilding
  • National Major Projects of China
  • National Natural Science Foundation of China

Zitieren

APA

Liu, Q., Zhao, Y., Liu, H., Liu, J., Zhao, W., & Xu, G. (2026). Molten Pool Dynamics and Sidewall Lack-of-Fusion Formation Mechanism in Narrow-Gap Welding of Thick TC4 Alloy. Coatings, 16(8), 904. https://doi.org/10.3390/coatings16080904

Vancouver

Liu Q, Zhao Y, Liu H, Liu J, Zhao W, Xu G. Molten Pool Dynamics and Sidewall Lack-of-Fusion Formation Mechanism in Narrow-Gap Welding of Thick TC4 Alloy. Coatings. 2026;16(8):904. doi:10.3390/coatings16080904

BibTeX
@article{Liu2026,
  author = {Liu, Qianli and Zhao, Yingshang and Liu, Haibin and Liu, Jingyu and Zhao, Wenyong and Xu, Guoxiang},
  title = {Molten Pool Dynamics and Sidewall Lack-of-Fusion Formation Mechanism in Narrow-Gap Welding of Thick TC4 Alloy},
  journal = {Coatings},
  year = {2026},
  volume = {16},
  number = {8},
  pages = {904},
  doi = {10.3390/coatings16080904}
}
Kostenlos starten →