Fabrication of Paraffin/Sepiolite Composite Phase Change Coatings for Building Thermal Insulation
Coatings · 17.07.2026 · 16 (7) · 856
DOI: 10.3390/coatings16070856 ↗Kurz gefasst
Fachartikel in der Zeitschrift Coatings, online erschienen am 17.07.2026. Verfasst von Lixin Zhang und 7 weiteren Autor:innen. Die Arbeit nennt 47 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Hebei Key Research and Development Program, Central Government Guided Local Science and Technology Development Fund Projects of Hebei Province, National Natural Science Foundation of China.
Abstract (Originalsprache)
To develop energy-efficient building coatings with enhanced thermal energy storage performance, paraffin/sepiolite composite phase change coatings were prepared using ultrasonic-assisted acid-activated sepiolite as a supporting matrix. The effects of acid treatment duration on the structural properties of sepiolite and the performance of the resulting coatings were systematically investigated. The results showed that acid activation for 1 h produced the optimal pore structure, yielding a maximum internal specific surface area of 125.881 m2 g−1. Longer treatment durations (>2 h) caused structural degradation and possible deterioration of pore structure. The paraffin/sepiolite composite phase change material prepared with JK-1 h exhibited a latent heat of 77.29 J g−1, outperforming that prepared with JK-2 h. Increasing the paraffin and CPCM contents enhanced the thermal storage capacity of the coatings; however, excessive CPCM loading deteriorated film integrity, resulting in cracking, reduced adhesion, and decreased hydrophobicity. Among all formulations, sample S3 demonstrated the best overall performance, with a latent heat of 33.51 J g−1, a pull-off strength of 5.9 MPa, and a water contact angle of 102.53°. Thermal cycling tests further confirmed its excellent thermal reliability and reusability. These findings indicate that paraffin/sepiolite composite phase change coatings have considerable potential for reducing building energy consumption and improving indoor thermal regulation.
Förderung
- Hebei Key Research and Development Program
- Central Government Guided Local Science and Technology Development Fund Projects of Hebei Province
- National Natural Science Foundation of China
Zitieren
APA
Zhang, L., Zheng, X., Li, H., Wang, T., Bai, S., Guo, S., Wang, L., & Yu, G. (2026). Fabrication of Paraffin/Sepiolite Composite Phase Change Coatings for Building Thermal Insulation. Coatings, 16(7), 856. https://doi.org/10.3390/coatings16070856
Vancouver
Zhang L, Zheng X, Li H, Wang T, Bai S, Guo S, et al. Fabrication of Paraffin/Sepiolite Composite Phase Change Coatings for Building Thermal Insulation. Coatings. 2026;16(7):856. doi:10.3390/coatings16070856
BibTeX
@article{Zhang2026,
author = {Zhang, Lixin and Zheng, Xinjing and Li, Haizhen and Wang, Tianliang and Bai, Shaowei and Guo, Shengfei and Wang, Longtao and Yu, Gang},
title = {Fabrication of Paraffin/Sepiolite Composite Phase Change Coatings for Building Thermal Insulation},
journal = {Coatings},
year = {2026},
volume = {16},
number = {7},
pages = {856},
doi = {10.3390/coatings16070856}
}
EUVIMED