Additive Manufacturing of (Fe/C)/ABS Composites: Microwave Absorption Performance and Loss Mechanism
Coatings · 11.07.2026 · 16 (7) · 824
DOI: 10.3390/coatings16070824 ↗Kurz gefasst
Fachartikel in der Zeitschrift Coatings, online erschienen am 11.07.2026. Verfasst von Liuwei Li und 9 weiteren Autor:innen. Die Arbeit nennt 41 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Science and Technology Department of Sichuan Province, China, Research Foundation of Southwest University of Science and Technology, China.
Abstract (Originalsprache)
(Fe/C)/ABS resin electromagnetic metamaterials were fabricated via 3D printing, and the effect of iron salt loading (0, 1, 2, and 3 g) in the Fe/C filler on the microwave absorption performance of the resulting composites was systematically investigated. The results demonstrate that, with increasing iron salt content, the microwave absorption bandwidth of the samples exhibits a trend of initial significant broadening followed by saturation. At an iron salt loading of 1 g, the (Fe/C)/ABS resin composite achieves an effective absorption bandwidth (EAB) of 6.2 GHz at a matching thickness of 10 mm, representing an approximately 48% enhancement over that of the pure C/ABS resin composite (4.2 GHz). The incorporation of iron salts not only endows the material with magnetic loss capability but also promotes the formation of an sp2-hybridized carbon framework within the carbon matrix during Fe/C composite preparation, concurrently introducing abundant defect sites that augment the dielectric loss capacity. Under the synergistic magneto-dielectric loss mechanism, the microwave attenuation coefficient of the material is markedly enhanced, and the effective absorption bandwidth is substantially broadened, all at a filler loading of merely 2.5 wt%. This study elucidates the influence of iron salt loading on the microwave absorption performance of (Fe/C)/ABS resin composites, while the 3D printing-based fabrication approach employed herein offers a promising technical pathway for the development of novel microwave-absorbing materials.
Förderung
- Science and Technology Department of Sichuan Province, China
- Research Foundation of Southwest University of Science and Technology, China
Zitieren
APA
Li, L., Dang, X., Xu, Q., Zhu, W., Cui, K., Li, S., Zhong, L., Yang, Z., Dai, J., & Zhang, X. (2026). Additive Manufacturing of (Fe/C)/ABS Composites: Microwave Absorption Performance and Loss Mechanism. Coatings, 16(7), 824. https://doi.org/10.3390/coatings16070824
Vancouver
Li L, Dang X, Xu Q, Zhu W, Cui K, Li S, et al. Additive Manufacturing of (Fe/C)/ABS Composites: Microwave Absorption Performance and Loss Mechanism. Coatings. 2026;16(7):824. doi:10.3390/coatings16070824
BibTeX
@article{Li2026,
author = {Li, Liuwei and Dang, Xing and Xu, Qi and Zhu, Weiming and Cui, Kaifang and Li, Siqi and Zhong, Liang and Yang, Zhigang and Dai, Jingxiong and Zhang, Xinchen},
title = {Additive Manufacturing of (Fe/C)/ABS Composites: Microwave Absorption Performance and Loss Mechanism},
journal = {Coatings},
year = {2026},
volume = {16},
number = {7},
pages = {824},
doi = {10.3390/coatings16070824}
}
EUVIMED