Optimization of Tin Fluoride Additive Concentration for High-Performance Sn–Pb Perovskite Solar Cells
Coatings · 06.07.2026 · 16 (7) · 805
DOI: 10.3390/coatings16070805 ↗Kurz gefasst
Fachartikel in der Zeitschrift Coatings, online erschienen am 06.07.2026. Verfasst von Yuelan Lv und 4 weiteren Autor:innen. Die Arbeit nennt 30 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, Guangdong Basic and Applied Basic Research Foundation, Guangdong University of Technology SPOE Seed Foundation.
Abstract (Originalsprache)
Tin–lead halide perovskite is a promising narrow-bandgap absorber for high-performance perovskite solar cells. However, the easy oxidation of Sn2+ and the resulting defect formation still limit these films’ quality and photovoltaic performance. Tin fluoride (SnF2) is widely used as an antioxidant additive in Sn-containing perovskites, but its optimal concentration remains strongly dependent on the specific perovskite composition. Herein, we systematically investigate the influence of SnF2 concentration on the film quality and device performance of methylammonium-free Sn–Pb perovskite solar cells. By varying the SnF2 content from 0 to 15% relative to SnI2, we find that an appropriate amount of SnF2 can effectively improve the surface morphology, enhance crystallinity, promote preferred crystal orientation, and suppress defect-assisted non-radiative recombination. In particular, the film with 10% SnF2 exhibits the smoothest surface, with a reduced root-mean-square roughness, enhanced photoluminescence intensity, and a lower trap density compared with the control films. As a result, the optimized device delivers a champion power conversion efficiency of 19.15%, significantly outperforming the control device. This work demonstrates the importance of SnF2 concentration optimization and provides a useful guideline for improving MA-free Sn–Pb perovskite solar cells.
Förderung
- National Natural Science Foundation of China
- Guangdong Basic and Applied Basic Research Foundation
- Guangdong University of Technology SPOE Seed Foundation
- 2025 Shanwei Talent Revitalization Plan for New Generation Electronic Information Industry
Zitieren
APA
Lv, Y., Hu, J., Cao, Q., Xie, F., & Zhang, X. (2026). Optimization of Tin Fluoride Additive Concentration for High-Performance Sn–Pb Perovskite Solar Cells. Coatings, 16(7), 805. https://doi.org/10.3390/coatings16070805
Vancouver
Lv Y, Hu J, Cao Q, Xie F, Zhang X. Optimization of Tin Fluoride Additive Concentration for High-Performance Sn–Pb Perovskite Solar Cells. Coatings. 2026;16(7):805. doi:10.3390/coatings16070805
BibTeX
@article{Lv2026,
author = {Lv, Yuelan and Hu, Jinyuan and Cao, Qinghua and Xie, Fobao and Zhang, Xiaoli},
title = {Optimization of Tin Fluoride Additive Concentration for High-Performance Sn–Pb Perovskite Solar Cells},
journal = {Coatings},
year = {2026},
volume = {16},
number = {7},
pages = {805},
doi = {10.3390/coatings16070805}
}
EUVIMED