EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Study on the Corrosion Behavior of YSZ Thermal Barrier Coatings by CMAS Composition

Yang Feng, Jie Zhang, Chunyang Liu, Yong Shang, Yanling Pei, Shengkai Gong, Huibin Xu

Coatings · 02.07.2026 · 16 (7) · 789

DOI: 10.3390/coatings16070789 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Coatings, online erschienen am 02.07.2026. Verfasst von Yang Feng und 6 weiteren Autor:innen. Die Arbeit nennt 25 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Key R&D Program of China, Key R&D Program of Zhejiang.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Yttria-stabilized zirconia (YSZ) thermal barrier coatings (TBCs) were fabricated by atmospheric plasma spraying (APS). Three CMAS powders with different compositions (CMAS-1, CMAS-2, CMAS-3) were selected, and corrosion tests were carried out at 1200 °C, 1250 °C, and 1300 °C. The relationships among CMAS viscosity, melting point, and reaction tendency with YSZ coatings were investigated. The results show that CMAS-3 possesses the highest viscosity yet the lowest melting point, CMAS-1 has the lowest viscosity but the highest melting point, and CMAS-2 falls between the two. Quantitative penetration depth measurements reveal that higher viscosity leads to slower infiltration, while a lower melting point enables earlier infiltration onset. At elevated temperatures, all CMAS compositions achieve complete penetration, indicating that the differences in melting point and viscosity become less critical when the temperature is sufficiently high. Corrosion tests reveal that CMAS-3 exhibits the strongest reaction tendency with YSZ coatings, while CMAS-1 shows the weakest. This indicates that the infiltration behavior is governed by a dual control of melting point and viscosity—melting point determines the onset of infiltration, while viscosity controls the penetration rate. This study provides an experimental basis for the design of CMAS-resistant coatings and the evaluation of their environmental adaptability. The key finding is that the melting point plays a dominant role in initiating CMAS infiltration, while viscosity primarily regulates the penetration rate.

Förderung

  • National Key R&D Program of China
  • Key R&D Program of Zhejiang

Zitieren

APA

Feng, Y., Zhang, J., Liu, C., Shang, Y., Pei, Y., Gong, S., & Xu, H. (2026). Study on the Corrosion Behavior of YSZ Thermal Barrier Coatings by CMAS Composition. Coatings, 16(7), 789. https://doi.org/10.3390/coatings16070789

Vancouver

Feng Y, Zhang J, Liu C, Shang Y, Pei Y, Gong S, et al. Study on the Corrosion Behavior of YSZ Thermal Barrier Coatings by CMAS Composition. Coatings. 2026;16(7):789. doi:10.3390/coatings16070789

BibTeX
@article{Feng2026,
  author = {Feng, Yang and Zhang, Jie and Liu, Chunyang and Shang, Yong and Pei, Yanling and Gong, Shengkai and Xu, Huibin},
  title = {Study on the Corrosion Behavior of YSZ Thermal Barrier Coatings by CMAS Composition},
  journal = {Coatings},
  year = {2026},
  volume = {16},
  number = {7},
  pages = {789},
  doi = {10.3390/coatings16070789}
}
Kostenlos starten →