EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Studies on the Ultrasonic De-Icing of an Iced Aluminum Plate by the Longitudinal-Bending Vibration Modes

Qihao Wang, Zhe Wang, Gang Li, Juan Ding, Yunpeng Lu, Yingwei Zhang, Wenfeng Guo, Guoan Hou

Coatings · 24.06.2026 · 16 (7) · 746

DOI: 10.3390/coatings16070746 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Coatings, online erschienen am 24.06.2026. Verfasst von Qihao Wang und 7 weiteren Autor:innen. Die Arbeit nennt 27 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Natural Science Foundation of Heilongjiang Province of China, Sichuan province all-electric navigation aircraft key technology engineering research center.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Under low-temperature and humid conditions, icing on airfoil surfaces, such as wind turbine blades, deteriorates the aerodynamic performance and decreases the power generation efficiency. To shorten the de-icing time and reduce the de-icing energy consumption, an ultrasonic de-icing method was used by coupling the longitudinal vibration of a piezoelectric transducer and the bending deformation of an iced plate. The simulation method was used to investigate the distributions and the variations of the stresses at the bond interface. An experimental system for ultrasonic de-icing tests was developed and built, and the de-icing experiments were carried out. The experimental results showed that the present ultrasonic de-icing method had a short de-icing time and low de-icing energy consumption, and the de-icing processes agreed with the simulation results. In the present research, the ice layer with a diameter of 20 mm was removed in the shortest de-icing time and the lowest energy consumption because its diameter was close to that of the transducer, which resulted in the highest shear stress at the bond interface. The present study provides theoretical and experimental foundations for deep research on the surface anti- and de-icing method with ultrasonic techniques.

Förderung

  • Natural Science Foundation of Heilongjiang Province of China
  • Sichuan province all-electric navigation aircraft key technology engineering research center

Zitieren

APA

Wang, Q., Wang, Z., Li, G., Ding, J., Lu, Y., Zhang, Y., Guo, W., & Hou, G. (2026). Studies on the Ultrasonic De-Icing of an Iced Aluminum Plate by the Longitudinal-Bending Vibration Modes. Coatings, 16(7), 746. https://doi.org/10.3390/coatings16070746

Vancouver

Wang Q, Wang Z, Li G, Ding J, Lu Y, Zhang Y, et al. Studies on the Ultrasonic De-Icing of an Iced Aluminum Plate by the Longitudinal-Bending Vibration Modes. Coatings. 2026;16(7):746. doi:10.3390/coatings16070746

BibTeX
@article{Wang2026,
  author = {Wang, Qihao and Wang, Zhe and Li, Gang and Ding, Juan and Lu, Yunpeng and Zhang, Yingwei and Guo, Wenfeng and Hou, Guoan},
  title = {Studies on the Ultrasonic De-Icing of an Iced Aluminum Plate by the Longitudinal-Bending Vibration Modes},
  journal = {Coatings},
  year = {2026},
  volume = {16},
  number = {7},
  pages = {746},
  doi = {10.3390/coatings16070746}
}
Kostenlos starten →