EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Friction Properties and Surface Failure Mechanisms of Micro-Textured 7075 Aluminum Alloy Processed by Nanosecond Laser

Fangcan Wei, Xiaofeng Wang, Yanming Zhu, Menghua Li, Fuli Zhang, Yiyi Fu, Xiaofan Deng

Coatings · 17.06.2026 · 16 (6) · 721

DOI: 10.3390/coatings16060721 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Coatings, online erschienen am 17.06.2026. Verfasst von Fangcan Wei und 6 weiteren Autor:innen. Die Arbeit nennt 25 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Tianjin Education Commission, Tianjin University of Technology and Education, Tianjin Metrology Science and Technology Project.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In order to improve the poor wear resistance and adhesive wear of 7075 aluminum alloy under dry friction conditions, a nanosecond pulse laser was used to prepare surface micro-textures with different shapes, surface densities, and feature sizes. Subsequently, their friction and wear behavior, as well as the corresponding failure mechanisms, were systematically investigated. Circular, square, and hexagonal micro-pit textures were selected as the research objects. Combined with surface morphology characterization, ball-on-disk dry wear tests, reciprocating friction tests, and contact stress and wear model analyses, the effects of texture parameters on tribological performance were systematically revealed. The results indicate that laser microtexturing can reduce the coefficient of friction on the surface of 7075 aluminum alloy to a certain extent and improve its wear resistance, with the friction-reducing effect closely related to the texture shape, areal density, and feature size. Among these, hexagonal texturing exhibited the best friction-reducing effect, while circular texturing demonstrated superior formation quality and friction stability. Compared to other specimens, the T8 group with a 7.5% areal density and a feature size of 100 µm exhibited the lowest average coefficient of friction. During the friction process, the microstructures gradually fail due to plastic flow filling, wear debris accumulation, and edge collapse. The research findings provide a reference for the optimized design and engineering applications of surface microstructures on aluminum alloys.

Förderung

  • Tianjin Education Commission
  • Tianjin University of Technology and Education
  • Tianjin Metrology Science and Technology Project
  • Inner Mongolia Autonomous Region Science and Technology Plan Project

Zitieren

APA

Wei, F., Wang, X., Zhu, Y., Li, M., Zhang, F., Fu, Y., & Deng, X. (2026). Friction Properties and Surface Failure Mechanisms of Micro-Textured 7075 Aluminum Alloy Processed by Nanosecond Laser. Coatings, 16(6), 721. https://doi.org/10.3390/coatings16060721

Vancouver

Wei F, Wang X, Zhu Y, Li M, Zhang F, Fu Y, et al. Friction Properties and Surface Failure Mechanisms of Micro-Textured 7075 Aluminum Alloy Processed by Nanosecond Laser. Coatings. 2026;16(6):721. doi:10.3390/coatings16060721

BibTeX
@article{Wei2026,
  author = {Wei, Fangcan and Wang, Xiaofeng and Zhu, Yanming and Li, Menghua and Zhang, Fuli and Fu, Yiyi and Deng, Xiaofan},
  title = {Friction Properties and Surface Failure Mechanisms of Micro-Textured 7075 Aluminum Alloy Processed by Nanosecond Laser},
  journal = {Coatings},
  year = {2026},
  volume = {16},
  number = {6},
  pages = {721},
  doi = {10.3390/coatings16060721}
}
Kostenlos starten →