Mechanical Properties, Tribological Performance and Oxidation Resistance of HfCx/a-C:H Coatings Prepared by Pulsed DC Magnetron Sputtering
Coatings · 03.06.2026 · 16 (6) · 674
DOI: 10.3390/coatings16060674 ↗Kurz gefasst
Fachartikel in der Zeitschrift Coatings, online erschienen am 03.06.2026. Verfasst von Huan Luo und 5 weiteren Autor:innen. Die Arbeit nennt 40 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, Shandong Provincial Natural Science Foundation.
Abstract (Originalsprache)
The development of protective coatings with simultaneously enhanced mechanical, tribological, and antioxidant properties remains a major challenge for micro-electro-mechanical systems operating under harsh environments. In this work, HfCx/a-C:H coatings with varying carbon contents were deposited by magnetron sputtering. Increasing the C2H2 flow rate from 12 to 20 sccm drove the coating structure to undergo two-stage evolution, from a composite structure dominated by HfC nanograins with a-C:H distributed at triple junctions of HfCx grain boundaries to a typical nanocomposite structure with ~8 nm HfCx nanograins embedded in a continuous a-C:H matrix. The coating deposited at 18 sccm exhibited the highest hardness (31.3 GPa) and effective Young’s modulus (392.3 GPa), owing to enhanced interface-mediated strengthening effect induced by the optimized nanocomposite structure. The coating prepared at 20 sccm showed the lowest friction coefficient (0.28), the lowest wear rate (6.82 × 10−6 mm3/N·m), and the best oxidation resistance. These improvements were supported by the enhanced mechanical properties and a-C:H fraction, the increased interface density and tortuosity, and the regulation of oxidation kinetics by the a-C:H matrix. This work provides an effective strategy for designing multi-functional protective coatings with balanced mechanical, tribological, and oxidation performance.
Förderung
- National Natural Science Foundation of China
- Shandong Provincial Natural Science Foundation
Zitieren
APA
Luo, H., Sun, H., Wang, P., Zhao, X., Briois, P., & Billard, A. (2026). Mechanical Properties, Tribological Performance and Oxidation Resistance of HfCx/a-C:H Coatings Prepared by Pulsed DC Magnetron Sputtering. Coatings, 16(6), 674. https://doi.org/10.3390/coatings16060674
Vancouver
Luo H, Sun H, Wang P, Zhao X, Briois P, Billard A. Mechanical Properties, Tribological Performance and Oxidation Resistance of HfCx/a-C:H Coatings Prepared by Pulsed DC Magnetron Sputtering. Coatings. 2026;16(6):674. doi:10.3390/coatings16060674
BibTeX
@article{Luo2026,
author = {Luo, Huan and Sun, Hui and Wang, Peipei and Zhao, Xing and Briois, Pascal and Billard, Alain},
title = {Mechanical Properties, Tribological Performance and Oxidation Resistance of HfCx/a-C:H Coatings Prepared by Pulsed DC Magnetron Sputtering},
journal = {Coatings},
year = {2026},
volume = {16},
number = {6},
pages = {674},
doi = {10.3390/coatings16060674}
}
EUVIMED