Enhancing Mechanical and Corrosion Resistance Properties of Fe-25Mn-12Cr-0.3C TWIP Steels via N Alloying and Processing Optimization
Coatings · 01.06.2026 · 16 (6) · 662
DOI: 10.3390/coatings16060662 ↗Kurz gefasst
Fachartikel in der Zeitschrift Coatings, online erschienen am 01.06.2026. Verfasst von Lingxiao Hu und 4 weiteren Autor:innen. Die Arbeit nennt 38 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Guangdong Basic and Applied Basic Research Foundation, Anhui Provincial Key Laboratory of Special Welding Technology Open Fund, Science and Technology Innovation Tackling Plan of Anhui Province.
Abstract (Originalsprache)
High-Mn twinning-induced plasticity (TWIP) steels are renowned for their exceptional strength-ductility synergy. However, their practical applications are severely constrained by inadequate yield strength and poor corrosion resistance. In this study, an N-alloyed TWIP steel (Fe-25Mn-12Cr-0.3C-0.3N, wt.%, designated as TWIP-2) was developed, using an N-free counterpart (Fe-25Mn-12Cr-0.3C, TWIP-1) as a reference. Both steels underwent hot forging (HF) followed by solution treatment (ST). The synergistic effects of N alloying and thermomechanical processing on the microstructural evolution, mechanical properties, and corrosion behavior were systematically investigated. Results indicate that all samples retain a single-phase FCC austenitic structure. N alloying increased the yield strength of the hot-forged TWIP steel from 488.1 MPa to 802.9 MPa while maintaining an elongation after fracture around 40%. Solution treatment markedly improved corrosion resistance, changing the corrosion mode from intergranular attack to pitting. The TWIP-2-ST specimen exhibited the lowest corrosion current density of 2.88 × 10−5 A/cm2 and demonstrated the best overall performance. This comprehensive improvement in mechanical and corrosion performance is primarily attributed to the elevated work-hardening capacity, a higher fraction of low-energy grain boundaries, and the beneficial role of interstitial N in suppressing pitting nucleation and propagation.
Förderung
- Guangdong Basic and Applied Basic Research Foundation
- Anhui Provincial Key Laboratory of Special Welding Technology Open Fund
- Science and Technology Innovation Tackling Plan of Anhui Province
- Key R&D Program of Yunnan Province
Zitieren
APA
Hu, L., Wang, X., Jin, C., Li, Y., & Liang, J. (2026). Enhancing Mechanical and Corrosion Resistance Properties of Fe-25Mn-12Cr-0.3C TWIP Steels via N Alloying and Processing Optimization. Coatings, 16(6), 662. https://doi.org/10.3390/coatings16060662
Vancouver
Hu L, Wang X, Jin C, Li Y, Liang J. Enhancing Mechanical and Corrosion Resistance Properties of Fe-25Mn-12Cr-0.3C TWIP Steels via N Alloying and Processing Optimization. Coatings. 2026;16(6):662. doi:10.3390/coatings16060662
BibTeX
@article{Hu2026,
author = {Hu, Lingxiao and Wang, Xingfu and Jin, Chuangzhi and Li, Yanxu and Liang, Juhua},
title = {Enhancing Mechanical and Corrosion Resistance Properties of Fe-25Mn-12Cr-0.3C TWIP Steels via N Alloying and Processing Optimization},
journal = {Coatings},
year = {2026},
volume = {16},
number = {6},
pages = {662},
doi = {10.3390/coatings16060662}
}
EUVIMED