The Effect of Different Laser Processing Parameters on the Microstructure and Properties of Copper Conductor Joints
Coatings · 12.05.2026 · 16 (5) · 591
DOI: 10.3390/coatings16050591 ↗Kurz gefasst
Fachartikel in der Zeitschrift Coatings, online erschienen am 12.05.2026. Verfasst von Ming Hu und 7 weiteren Autor:innen. Die Arbeit nennt 27 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Jiangsu Provincial Department of Science and Technology, Jiangsu Education Department.
Abstract (Originalsprache)
To mitigate welding defects in copper wire conductors induced by their high laser reflectivity and thermal conductivity during laser welding, this study combines numerical simulation and experimental testing to investigate the influences of laser processing parameters on the mechanical properties, molten pool dynamic evolution, and microstructural characteristics of copper self-fusion welds and pure Ni powder-filled welds. The results demonstrate that, for self-fusion welding, a moderate increase in laser power and welding time elevates the heat input, which promotes weld penetration and forming quality. The optimal parameter combination (3900 W, 1.0 s) yields a balanced internal densification and grain refinement, with the joint tensile strength reaching a peak of 245 MPa. For Ni powder-filled welding, the infinite solid solubility between Cu and Ni improves interfacial metallurgical bonding. Under the optimal parameters (3500 W, 1.2 s), the joint tensile strength increases to 282 MPa. Heat input exerts a significant effect on the temperature field evolution in both welding processes, yet the molten pool expansion behaviors differ: self-fusion welding exhibits continuous expansion with rising heat input, whereas Ni powder-filled welding displays complex nonlinear variations.
Förderung
- Jiangsu Provincial Department of Science and Technology
- Jiangsu Education Department
Zitieren
APA
Hu, M., Yu, W., Wu, Q., Li, X., Liu, Y., Zhang, H., Su, L., & Su, B. (2026). The Effect of Different Laser Processing Parameters on the Microstructure and Properties of Copper Conductor Joints. Coatings, 16(5), 591. https://doi.org/10.3390/coatings16050591
Vancouver
Hu M, Yu W, Wu Q, Li X, Liu Y, Zhang H, et al. The Effect of Different Laser Processing Parameters on the Microstructure and Properties of Copper Conductor Joints. Coatings. 2026;16(5):591. doi:10.3390/coatings16050591
BibTeX
@article{Hu2026,
author = {Hu, Ming and Yu, Wenqian and Wu, Qiong and Li, Xinyu and Liu, Yu and Zhang, Hongliang and Su, Lihong and Su, Boyong},
title = {The Effect of Different Laser Processing Parameters on the Microstructure and Properties of Copper Conductor Joints},
journal = {Coatings},
year = {2026},
volume = {16},
number = {5},
pages = {591},
doi = {10.3390/coatings16050591}
}
EUVIMED