EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Mechanical Properties and High Temperature Tribological Behavior of HfTaC Coating for Carbon/Carbon Composites

Nan Wang, Jing Zhou, Zhaoxin Li, Jiumei Gao, Feilong Jia, Yan Qi, Xu Chen, Hao Lin, Hongliang Liu, Shusheng Xu

Coatings · 12.05.2026 · 16 (5) · 588

DOI: 10.3390/coatings16050588 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Coatings, online erschienen am 12.05.2026. Verfasst von Nan Wang und 9 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 40 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Key Research and Development Program in Shandong Province, Natural Science Foundation of Shandong Province, Strategic priority Research Program of the Chinese Academy of Sciences.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

HfC, TaC, and HfTaC composite coatings were successfully fabricated on SiC-coated carbon/carbon (C/C) composites using the double glow plasma alloying (DGPA) technique. The microstructure, mechanical properties, and tribological behaviors of the coatings were systematically investigated. The HfTaC coating exhibited a dense and uniform structure with good interfacial integrity and a compositionally graded transition layer, effectively relieving thermal stress. The hardness of HfTaC and HfC coatings (approximately 12 GPa) was higher than that of the TaC coating. Moreover, the higher K value (1.02) and H/E ratio (H/E = 0.09, H3/E2 = 0.085 GPa) indicate that the HfTaC coating exhibits good load-bearing capacity and toughness. Under both 5 N and 15 N loads in the reciprocating friction, the HfTaC coating maintained the lowest and most stable friction coefficient (~0.18). Under the 15 N load, it exhibited the smallest specific wear rate. Observation of the wear scars revealed that the HfC and TaC coatings suffered from pore formation and flake-like spallation, while the HfTaC coating retained structural integrity with only minor cracks. In high-temperature ball-on-disc friction tests up to 500 °C, the wear mechanism of the HfTaC coating gradually transitioned from mild abrasive wear to severe oxidative and adhesive wear, yet the HfTaC coating still provided effective protection. These findings demonstrate that the DGPA-fabricated HfTaC coating is a promising candidate for enhancing the wear resistance and service durability of C/C composites.

Förderung

  • Key Research and Development Program in Shandong Province
  • Natural Science Foundation of Shandong Province
  • Strategic priority Research Program of the Chinese Academy of Sciences
  • Key Research Project of Shandong Provincial Natural Science Foundation
  • Key Instrument Development Program of the National Natural Science Foundation of China
  • Program for Taishan Scholars of Shandong Province, and the Provincial-Level Leading Talent Supporting Projects in Yantai City

Zitieren

APA

Wang, N., Zhou, J., Li, Z., Gao, J., Jia, F., Qi, Y., Chen, X., Lin, H., Liu, H., & Xu, S. (2026). Mechanical Properties and High Temperature Tribological Behavior of HfTaC Coating for Carbon/Carbon Composites. Coatings, 16(5), 588. https://doi.org/10.3390/coatings16050588

Vancouver

Wang N, Zhou J, Li Z, Gao J, Jia F, Qi Y, et al. Mechanical Properties and High Temperature Tribological Behavior of HfTaC Coating for Carbon/Carbon Composites. Coatings. 2026;16(5):588. doi:10.3390/coatings16050588

BibTeX
@article{Wang2026,
  author = {Wang, Nan and Zhou, Jing and Li, Zhaoxin and Gao, Jiumei and Jia, Feilong and Qi, Yan and Chen, Xu and Lin, Hao and Liu, Hongliang and Xu, Shusheng},
  title = {Mechanical Properties and High Temperature Tribological Behavior of HfTaC Coating for Carbon/Carbon Composites},
  journal = {Coatings},
  year = {2026},
  volume = {16},
  number = {5},
  pages = {588},
  doi = {10.3390/coatings16050588}
}
Kostenlos starten →