Analysis of the Whole Process Evolution of Deformation in Q420 Thin Plate Welding and the Influence of Welding Speed Based on 3D DIC
Coatings · 09.05.2026 · 16 (5) · 573
DOI: 10.3390/coatings16050573 ↗Kurz gefasst
Fachartikel in der Zeitschrift Coatings, online erschienen am 09.05.2026. Verfasst von Xiqiang Ma und 3 weiteren Autor:innen. Die Arbeit nennt 29 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, Key Research and Development Program of Longmen Laboratory.
Abstract (Originalsprache)
To investigate the effect of welding speed on the out-of-plane deformation of Q420 low-alloy high-strength steel thin plates, this study employed a three-dimensional digital image correlation system to monitor the deformation dynamically during TIG welding and cooling. Unlike existing studies that mostly focus on post-weld residual deformation or a single welding stage, this study, under a fixed current of 36 A and arc voltage of 14 V, sets welding speeds ranging from 4.5 to 11.8 mm/s, and for the first time systematically reveals the complete evolution path of Q420 thin plate (2 mm) welding deformation, which includes “thermal expansion—instability mutation—elastic rebound—residual stabilization”. The results show that the welding speed is significantly negatively correlated with the out-of-plane deformation. Although low-speed welding has a high peak plastic strain, the final residual strain is almost completely released; while high-speed welding has a low peak strain but retains a relatively high residual strain. This abnormal phenomenon reveals the deep mechanism that the accumulation and release of plastic strain are asymmetrically regulated by the welding speed. These findings support process optimization for high-strength steel thin plates.
Förderung
- National Natural Science Foundation of China
- Key Research and Development Program of Longmen Laboratory
Zitieren
APA
Ma, X., Li, Y., Guo, N., & Li, Y. (2026). Analysis of the Whole Process Evolution of Deformation in Q420 Thin Plate Welding and the Influence of Welding Speed Based on 3D DIC. Coatings, 16(5), 573. https://doi.org/10.3390/coatings16050573
Vancouver
Ma X, Li Y, Guo N, Li Y. Analysis of the Whole Process Evolution of Deformation in Q420 Thin Plate Welding and the Influence of Welding Speed Based on 3D DIC. Coatings. 2026;16(5):573. doi:10.3390/coatings16050573
BibTeX
@article{Ma2026,
author = {Ma, Xiqiang and Li, Yaoyao and Guo, Nan and Li, Yangyang},
title = {Analysis of the Whole Process Evolution of Deformation in Q420 Thin Plate Welding and the Influence of Welding Speed Based on 3D DIC},
journal = {Coatings},
year = {2026},
volume = {16},
number = {5},
pages = {573},
doi = {10.3390/coatings16050573}
}
EUVIMED