EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Optimization of Corrosion Resistance in Magnetron-Sputtered CrAlN Coatings for Alkaline Seawater Electrolysis via Nitrogen Flow Ratio Control: Microstructural Evolution and Corrosion Mechanism

Mingyu Liu, Yu Liu, Jing Mi, Yanyan Fu, Lei Hao, Ziqiang Dong, Qinghe Yu

Coatings · 27.04.2026 · 16 (5) · 524

DOI: 10.3390/coatings16050524 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Coatings, online erschienen am 27.04.2026. Verfasst von Mingyu Liu und 6 weiteren Autor:innen. Die Arbeit nennt 38 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Key Research and Development Program of China.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Designing materials with superior corrosion resistance is critical for seawater electrolysis systems to achieve efficient and long-term stable hydrogen production. In the current study, CrAlN coatings were deposited on TA1 titanium substrates by reactive magnetron sputtering with nitrogen flow ratios ranging from 40%–70% to investigate the effect of nitrogen stoichiometry on corrosion behavior in simulated alkaline seawater (pH ≈ 14, chloride-containing). Microstructural characterization (Scanning Electron Microscopy (SEM), Energy Dispersive X-ray Spectroscopy (EDS), Grazing Incidence X-Ray Diffraction (GIXRD), Transmission Electron Microscopy (TEM), X-Ray Photoelectron Spectroscopy (XPS), Atomic Force Microscopy (AFM)) reveals that a 60% nitrogen ratio promotes grain refinement, improved CrN/AlN phase stoichiometry, and reduced oxygen-related defects, resulting in a dense columnar structure with minimized diffusion pathways. Electrochemical measurements show that this condition yields the lowest corrosion current density (0.297 μA·cm−2) and the highest polarization resistance (123.9 kΩ·cm2). Electrochemical impedance spectroscopy confirms enhanced charge transfer resistance and suppressed ionic transport at the coating/electrolyte interface. The results establish a clear correlation between nitrogen-controlled phase evolution, defect density, and passivation kinetics in highly alkaline chloride environments relevant to seawater electrolysis. This study targets the fabrication of protective coatings for alkaline seawater electrolysis via nitrogen flow ratio optimization. The optimized CrAlN coating achieves remarkably improved corrosion resistance compared with existing coatings, showing promising practical value for long-term stable seawater electrolysis.

Förderung

  • National Key Research and Development Program of China

Zitieren

APA

Liu, M., Liu, Y., Mi, J., Fu, Y., Hao, L., Dong, Z., & Yu, Q. (2026). Optimization of Corrosion Resistance in Magnetron-Sputtered CrAlN Coatings for Alkaline Seawater Electrolysis via Nitrogen Flow Ratio Control: Microstructural Evolution and Corrosion Mechanism. Coatings, 16(5), 524. https://doi.org/10.3390/coatings16050524

Vancouver

Liu M, Liu Y, Mi J, Fu Y, Hao L, Dong Z, et al. Optimization of Corrosion Resistance in Magnetron-Sputtered CrAlN Coatings for Alkaline Seawater Electrolysis via Nitrogen Flow Ratio Control: Microstructural Evolution and Corrosion Mechanism. Coatings. 2026;16(5):524. doi:10.3390/coatings16050524

BibTeX
@article{Liu2026,
  author = {Liu, Mingyu and Liu, Yu and Mi, Jing and Fu, Yanyan and Hao, Lei and Dong, Ziqiang and Yu, Qinghe},
  title = {Optimization of Corrosion Resistance in Magnetron-Sputtered CrAlN Coatings for Alkaline Seawater Electrolysis via Nitrogen Flow Ratio Control: Microstructural Evolution and Corrosion Mechanism},
  journal = {Coatings},
  year = {2026},
  volume = {16},
  number = {5},
  pages = {524},
  doi = {10.3390/coatings16050524}
}
Kostenlos starten →