Study on Annealed Microstructure and Mechanical Properties of Cold-Rolled FeCoCrNiMn High-Entropy Alloy
Coatings · 23.04.2026 · 16 (5) · 513
DOI: 10.3390/coatings16050513 ↗Kurz gefasst
Fachartikel in der Zeitschrift Coatings, online erschienen am 23.04.2026. Verfasst von Wenquan Zhao und 3 weiteren Autor:innen. Die Arbeit nennt 25 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
An equiatomic FeCoCrNiMn high-entropy alloy was processed by cold rolling followed by isothermal annealing at 900 °C for various durations. The microstructural evolution and mechanical properties of the alloy were systematically investigated as a function of annealing time. The results indicate that the alloy maintained a single-phase face-centered cubic (FCC) structure throughout the entire annealing process, with no secondary phases or precipitates detected. After annealing at 900 °C for 2 min, the recrystallized volume fraction reached approximately 80%, resulting in the formation of an ultrafine-grained microstructure. The corresponding Vickers hardness, yield strength, and total elongation were measured to be 249 HV, 616 MPa, and 32%, respectively, demonstrating a desirable combination of strength and ductility. The recrystallization process was essentially complete after 5 min of annealing. With further increases in annealing time, the grain size continued to coarsen, accompanied by a gradual decrease in hardness and strength and a progressive improvement in ductility, reflecting a typical strength–ductility trade-off.
Zitieren
APA
Zhao, W., Li, X., Li, Z., & Xing, S. (2026). Study on Annealed Microstructure and Mechanical Properties of Cold-Rolled FeCoCrNiMn High-Entropy Alloy. Coatings, 16(5), 513. https://doi.org/10.3390/coatings16050513
Vancouver
Zhao W, Li X, Li Z, Xing S. Study on Annealed Microstructure and Mechanical Properties of Cold-Rolled FeCoCrNiMn High-Entropy Alloy. Coatings. 2026;16(5):513. doi:10.3390/coatings16050513
BibTeX
@article{Zhao2026,
author = {Zhao, Wenquan and Li, Xiaocong and Li, Zhikun and Xing, Shilong},
title = {Study on Annealed Microstructure and Mechanical Properties of Cold-Rolled FeCoCrNiMn High-Entropy Alloy},
journal = {Coatings},
year = {2026},
volume = {16},
number = {5},
pages = {513},
doi = {10.3390/coatings16050513}
}
EUVIMED