Influence of PVD TiN Coatings on the Wear Behavior and Durability of HSS Milling Tools in Solid Wood Machining
Coatings · 20.04.2026 · 16 (4) · 500
DOI: 10.3390/coatings16040500 ↗Kurz gefasst
Fachartikel in der Zeitschrift Coatings, online erschienen am 20.04.2026. Verfasst von Cristina Vasilica Icociu und 5 weiteren Autor:innen. Die Arbeit nennt 33 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
Tool wear remains a critical limiting factor in machining performance, particularly in dry cutting conditions where friction and tribological interactions dominate. This study investigates the influence of a 5–8 μm PVD-deposited TiN coating on the wear behavior of high-speed steel (HSS) end mills during milling of three representative wood species (oak, beech, and fir). A spatially resolved wear evaluation methodology was employed, based on ten measurement points distributed along a 20 mm active cutting edge, enabling simultaneous assessment of mean wear and maximum localized wear (Umax). A factorial experimental design combining material type and feed rate (1500–2500 mm/min) was analyzed using two-way ANOVA with effect size quantification (η2). The results reveal a statistically significant reduction in mean wear for TiN-coated tools (F = 7.46, p = 0.0195, η2 = 0.34), corresponding to an average decrease of approximately 46% compared to uncoated tools. Maximum wear was influenced by both coating (F = 14.73, p = 0.0028, η2 = 0.399) and material (F = 4.37, p = 0.040, η2 = 0.237). The experimental findings are interpreted through a tribological framework, indicating a transition from abrasion- and micro-chipping-dominated degradation in uncoated tools to a controlled wear regime in TiN-coated tools, characterized by reduced asperity penetration, delayed crack initiation, and limited tribochemical interactions. These results demonstrate that coating effects dominate global wear evolution, while material properties influence localized degradation. The proposed combined experimental–statistical–mechanistic approach provides a robust framework for understanding and optimizing tool performance in dry machining environments.
Zitieren
APA
Icociu, C. V., Pascu, N. E., Bendic, E., Dobrotă, D., Dobrescu, G. T., & Rotaru, I. M. (2026). Influence of PVD TiN Coatings on the Wear Behavior and Durability of HSS Milling Tools in Solid Wood Machining. Coatings, 16(4), 500. https://doi.org/10.3390/coatings16040500
Vancouver
Icociu CV, Pascu NE, Bendic E, Dobrotă D, Dobrescu GT, Rotaru IM. Influence of PVD TiN Coatings on the Wear Behavior and Durability of HSS Milling Tools in Solid Wood Machining. Coatings. 2026;16(4):500. doi:10.3390/coatings16040500
BibTeX
@article{Icociu2026,
author = {Icociu, Cristina Vasilica and Pascu, Nicoleta Elisabeta and Bendic, Eduard and Dobrotă, Dan and Dobrescu, Gabriel Tiberiu and Rotaru, Ionela Magdalena},
title = {Influence of PVD TiN Coatings on the Wear Behavior and Durability of HSS Milling Tools in Solid Wood Machining},
journal = {Coatings},
year = {2026},
volume = {16},
number = {4},
pages = {500},
doi = {10.3390/coatings16040500}
}
EUVIMED