EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Hysteresis Heat Generation in Polyurethane O-Rings: Thermo-Mechanical Coupling Mechanism and Its Quantified Effect on Reciprocating Sealing Performance

Chang Yang, Wenbo Luo, Jing Liu, Jiawei Liu, Yu Tang, Zhichao Wang

Coatings · 04.04.2026 · 16 (4) · 436

DOI: 10.3390/coatings16040436 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Coatings, online erschienen am 04.04.2026. Verfasst von Chang Yang und 5 weiteren Autor:innen. Die Arbeit nennt 35 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, Science and Technology Innovation Program of Hunan Province.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Polyurethane O-ring seals are vital for the service life and sealing reliability of hydraulic systems, yet internal hysteresis heat generation under reciprocating motion causes localized temperature rise, altering contact pressure distribution and impairing sealing performance. This study aimed to clarify the coupled effects of reciprocating motion parameters on O-ring hysteresis heat generation and sealing performance. A unified hysteresis heat generation rate expression was derived by combining the time–temperature superposition principle with the Maier–Göritz model, and the heat source model was integrated into a thermo-mechanically coupled finite element analysis (FEA) framework, validated by matching simulated and experimental temperature rise histories. Under baseline conditions, hysteresis heating causes the O-ring’s peak contact pressure to decrease by approximately 0.4 MPa during the outward stroke. Parametric analysis revealed that elevated operating parameters increase contact pressure to maintain effective sealing, but simultaneously intensify hysteresis heating. Quantitatively, the maximum O-ring temperature was highly sensitive to operating conditions, reaching 63.6 °C at 8 MPa hydraulic pressure, 60.0 °C at a 90 Hz reciprocating frequency, and up to 81.5 °C for a friction coefficient of 0.2. Although the current framework is limited by the exclusion of interfacial frictional heating, it enables the reliable quantitative prediction of thermal loads. Ultimately, this study provides a robust method for assessing sealing safety margins and offers theoretical guidance for the structural optimization of hydraulic sealing systems.

Förderung

  • National Natural Science Foundation of China
  • Science and Technology Innovation Program of Hunan Province

Zitieren

APA

Yang, C., Luo, W., Liu, J., Liu, J., Tang, Y., & Wang, Z. (2026). Hysteresis Heat Generation in Polyurethane O-Rings: Thermo-Mechanical Coupling Mechanism and Its Quantified Effect on Reciprocating Sealing Performance. Coatings, 16(4), 436. https://doi.org/10.3390/coatings16040436

Vancouver

Yang C, Luo W, Liu J, Liu J, Tang Y, Wang Z. Hysteresis Heat Generation in Polyurethane O-Rings: Thermo-Mechanical Coupling Mechanism and Its Quantified Effect on Reciprocating Sealing Performance. Coatings. 2026;16(4):436. doi:10.3390/coatings16040436

BibTeX
@article{Yang2026,
  author = {Yang, Chang and Luo, Wenbo and Liu, Jing and Liu, Jiawei and Tang, Yu and Wang, Zhichao},
  title = {Hysteresis Heat Generation in Polyurethane O-Rings: Thermo-Mechanical Coupling Mechanism and Its Quantified Effect on Reciprocating Sealing Performance},
  journal = {Coatings},
  year = {2026},
  volume = {16},
  number = {4},
  pages = {436},
  doi = {10.3390/coatings16040436}
}
Kostenlos starten →