Effects of Different Sulfidation Temperatures on the Hydrogen Evolution Reaction Performance of Fe-Co-Ni-Mo-Cu High-Entropy Alloys
Coatings · 13.03.2026 · 16 (3) · 362
DOI: 10.3390/coatings16030362 ↗Kurz gefasst
Fachartikel in der Zeitschrift Coatings, online erschienen am 13.03.2026. Verfasst von Yuzuo Liu und 5 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 29 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Guangdong S&T program, National Natural Science Foundation of China.
Abstract (Originalsprache)
In this study, FeCoNiMoCu high-entropy alloy thin films were sulfided at different temperatures ranged from 250 °C to 450 °C by chemical vapor deposition, and the resultant sulfided Fe-Co-Ni-Mo-Cu-S alloys were characterized by means of XRD, SEM, XPS and EDS. HER performance tests were carried out in four electrolyte systems, namely 0.5 M H2SO4, 1 M KOH, 1 M KOH + 0.5 M NaCl and 1 M KOH + 1 M Na2S. The results indicated that the as-prepared electrodes exhibited low HER overpotentials in all four electrolytes, with the optimal catalytic performance consistently achieved at a sulfidation temperature of 350 °C. Among the tested systems, the electrode delivered the best HER activity in 0.5 M H2SO4, showing an overpotential of merely 53 mV and a Tafel slope of 86.72 mV dec−1 at a current density of 10 mA·cm−2. In 1.0 M KOH, the overpotential required to reach the same current density was 98 mV with a Tafel slope of 72.43 mV dec−1. For the mixed electrolyte of 1 M KOH and 0.5 M NaCl, the overpotential at 10 mA·cm−2 was 142 mV accompanied by a Tafel slope of 49.51 mV dec−1. In contrast, the 1 M KOH + 1 M Na2S electrolyte yielded an overpotential of 77 mV and a Tafel slope of 84.01 mV dec−1 at the identical current density. HER tests revealed that the sulfidation temperature exerts a significant influence on the formation and distribution of active phases of multi-metal sulfides (e.g., FeSx, CoSx, NiSx, MoS2) on the electrode surface. The electrodes prepared at an appropriate sulfidation temperature exhibit a larger specific surface area and enhanced hydrogen evolution reaction performance for water electrolysis. These findings may provide useful references for other researchers in the design and fabrication of high-entropy alloy-based HER catalysts.
Förderung
- Guangdong S&T program
- National Natural Science Foundation of China
Zitieren
APA
Liu, Y., Feng, Y., He, Z., Yang, J., Chen, H., & Tan, H. (2026). Effects of Different Sulfidation Temperatures on the Hydrogen Evolution Reaction Performance of Fe-Co-Ni-Mo-Cu High-Entropy Alloys. Coatings, 16(3), 362. https://doi.org/10.3390/coatings16030362
Vancouver
Liu Y, Feng Y, He Z, Yang J, Chen H, Tan H. Effects of Different Sulfidation Temperatures on the Hydrogen Evolution Reaction Performance of Fe-Co-Ni-Mo-Cu High-Entropy Alloys. Coatings. 2026;16(3):362. doi:10.3390/coatings16030362
BibTeX
@article{Liu2026,
author = {Liu, Yuzuo and Feng, Yulong and He, Zhihao and Yang, Junsheng and Chen, Huangchu and Tan, Hua},
title = {Effects of Different Sulfidation Temperatures on the Hydrogen Evolution Reaction Performance of Fe-Co-Ni-Mo-Cu High-Entropy Alloys},
journal = {Coatings},
year = {2026},
volume = {16},
number = {3},
pages = {362},
doi = {10.3390/coatings16030362}
}
EUVIMED