EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Effect of Application Method and Amount of Expandable Graphite with Polyurea on Wood Thermal Resistance

Katarína Trojanová, Elena Kmeťová, Danica Kačíková, Adriana Eštoková, František Kačík

Coatings · 12.02.2026 · 16 (2) · 231

DOI: 10.3390/coatings16020231 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Coatings, online erschienen am 12.02.2026. Verfasst von Katarína Trojanová und 4 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 46 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: IPA (Internal Project Agency) TUZVO, Slovak Research and Development Agency, Scientific Grant Agency of the Ministry of Education, Research, Development and Youth of the Slovak Republic.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Wood, which is flammable, is commonly used as a building material and can be improved using a suitable surface treatment. A promising coating solution is polyurea, featuring properties like flexibility, mechanical resistance, resistance against water, etc., but it is also easily flammable. Expandable graphite (EG) is effective as a flame retardant and environmentally suitable. In this study, we studied the suitability of polyurea improved with EG. Spruce wood samples with dimensions of 50 mm × 40 mm × 10 mm were divided into eight groups, each including five samples. Each group was subjected to two applications of polyurea and EG in various combinations to examine the best combination with the lowest mass loss. The second component of the experiments aimed to examine the effectiveness of EG, which was applied in different weights. During the experiments, samples were thermally loaded in an apparatus for 10 min, where a heat flux of 30 kW·m−2 was applied to the sample surface and the mass loss was continuously recorded. Lastly, thermal analysis was performed. The best results were observed for the combination of NEOPROOF mixed with 0.3 g of EG covered with NEODUR. The thermal analysis results revealed substantial differences: NEOPROOF, a polyurea, had only one degradation step, while NEODUR, which also contained polyurethanes, decomposed in several steps.

Förderung

  • IPA (Internal Project Agency) TUZVO
  • Slovak Research and Development Agency
  • Scientific Grant Agency of the Ministry of Education, Research, Development and Youth of the Slovak Republic

Zitieren

APA

Trojanová, K., Kmeťová, E., Kačíková, D., Eštoková, A., & Kačík, F. (2026). Effect of Application Method and Amount of Expandable Graphite with Polyurea on Wood Thermal Resistance. Coatings, 16(2), 231. https://doi.org/10.3390/coatings16020231

Vancouver

Trojanová K, Kmeťová E, Kačíková D, Eštoková A, Kačík F. Effect of Application Method and Amount of Expandable Graphite with Polyurea on Wood Thermal Resistance. Coatings. 2026;16(2):231. doi:10.3390/coatings16020231

BibTeX
@article{Trojanov2026,
  author = {Trojanová, Katarína and Kmeťová, Elena and Kačíková, Danica and Eštoková, Adriana and Kačík, František},
  title = {Effect of Application Method and Amount of Expandable Graphite with Polyurea on Wood Thermal Resistance},
  journal = {Coatings},
  year = {2026},
  volume = {16},
  number = {2},
  pages = {231},
  doi = {10.3390/coatings16020231}
}
Kostenlos starten →