Optimization of Process Parameters for Manufacturing SS316L Parts by LPBF Using a Laser-Adapted Powder Deposition System
Coatings · 30.01.2026 · 16 (2) · 167
DOI: 10.3390/coatings16020167 ↗Kurz gefasst
Fachartikel in der Zeitschrift Coatings, online erschienen am 30.01.2026. Verfasst von Marian Ferreira Baptista da Silva und 3 weiteren Autor:innen. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 37 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: FAPESP, CAPES.
Abstract (Originalsprache)
This study aims to optimize the process parameters for manufacturing stainless steel AISI 316L (SS316L) components using Laser Powder Bed Fusion (LPBF) with a Laser-Adapted Powder Deposition System. The influence of volumetric energy density (VED), laser intensity, and interaction time on the topography, defect formation, and hardness of the manufactured parts was investigated. The LPBF process parameters were systematically varied, including laser power (50–250 W) and scanning speed (15–250 mm/s). This resulted in VED values ranging from 55.6 to 647.5 J/mm3. The optimization process revealed ideal process conditions at VED values of 170.9, 256.4, and 641.0 J/mm3, with a minimum laser intensity of 11.8 kW/mm2 and interaction times ranging from 0.36 to 2.70 ms. Microstructural analysis revealed a predominantly austenitic phase with residual stresses associated with the LPBF process’s high cooling rates. Mechanical testing showed that parts manufactured under optimized conditions exhibited superior hardness (234–244 HV) compared to conventionally processed SS316L (170–220 HV). It was demonstrated that the laser-adapted powder deposition system can effectively fabricate high-precision components by understanding the interdependencies of parameters in LPBF. This approach contributes to optimizing manufacturing strategies for SS316L components.
Förderung
- FAPESP
- CAPES
Zitieren
APA
Silva, M. F. B. D., Jimenez, L. R. D. A. A., Oliveira, R. D. M., & Capella, A. G. (2026). Optimization of Process Parameters for Manufacturing SS316L Parts by LPBF Using a Laser-Adapted Powder Deposition System. Coatings, 16(2), 167. https://doi.org/10.3390/coatings16020167
Vancouver
Silva MFBD, Jimenez LRDAA, Oliveira RDM, Capella AG. Optimization of Process Parameters for Manufacturing SS316L Parts by LPBF Using a Laser-Adapted Powder Deposition System. Coatings. 2026;16(2):167. doi:10.3390/coatings16020167
BibTeX
@article{Silva2026,
author = {Silva, Marian Ferreira Baptista da and Jimenez, Laila Ribeiro de Andrade Acevedo and Oliveira, Rogério de Moraes and Capella, Aline Gonçalves},
title = {Optimization of Process Parameters for Manufacturing SS316L Parts by LPBF Using a Laser-Adapted Powder Deposition System},
journal = {Coatings},
year = {2026},
volume = {16},
number = {2},
pages = {167},
doi = {10.3390/coatings16020167}
}
EUVIMED