Research Progress of High-Entropy Ceramic Films via Arc Ion Plating
Coatings · 09.01.2026 · 16 (1) · 82
DOI: 10.3390/coatings16010082 ↗Kurz gefasst
Fachartikel in der Zeitschrift Coatings, online erschienen am 09.01.2026. Verfasst von Haoran Chen und 6 weiteren Autor:innen. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 130 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, Explorers Program of Shanghai, Shanghai Engineering Research Center of High-Performance Medical Device Materials.
Abstract (Originalsprache)
High-entropy ceramic (HEC) thin films generally refer to multi-component solid solutions composed of multiple metallic and non-metallic elements, existing in forms such as carbides, nitrides, and borides. Benefiting from the high-entropy effect, lattice distortion, sluggish diffusion, and cocktail effect of high-entropy systems, HEC thin films form simple amorphous or nanocrystalline structures while exhibiting high hardness/elastic modulus, excellent tribological properties, and thermal stability. Although the mixing entropy increases with the number of elements in the system, a higher number of elements does not guarantee improved performance. In addition to system configuration, the regulation of preparation methods and processes is also a key factor in enhancing performance. Arc ion plating (AIP) has emerged as one of the mainstream techniques for fabricating high-entropy ceramic (HEC) thin films, which is attributed to its high ionization efficiency, flexible multi-target configuration, precise control over process parameters, and high deposition rate. Through rational design of the compositional system and optimization of key process parameters—such as the substrate bias voltage, gas flow rates, and arc current—HEC thin films with high hardness/toughness, wear resistance, high-temperature oxidation resistance, and electrochemical performance can be fabricated, and several of these properties can even be simultaneously achieved. Against the backdrop of AIP deposition, this review focuses on discussions grounded in the thermodynamic principles of high-entropy systems. It systematically discusses how process parameters influence the microstructure and, consequently, the mechanical, tribological, electrochemical, and high-temperature oxidation behaviors of HEC thin films under various complex service conditions. Finally, the review outlines prospective research directions for advancing the AIP-based synthesis of high-entropy ceramic coatings.
Förderung
- National Natural Science Foundation of China
- Explorers Program of Shanghai
- Shanghai Engineering Research Center of High-Performance Medical Device Materials
Zitieren
APA
Chen, H., Mi, B., Wang, J., Chen, T., Ma, X., Liu, P., & Li, W. (2026). Research Progress of High-Entropy Ceramic Films via Arc Ion Plating. Coatings, 16(1), 82. https://doi.org/10.3390/coatings16010082
Vancouver
Chen H, Mi B, Wang J, Chen T, Ma X, Liu P, et al. Research Progress of High-Entropy Ceramic Films via Arc Ion Plating. Coatings. 2026;16(1):82. doi:10.3390/coatings16010082
BibTeX
@article{Chen2026,
author = {Chen, Haoran and Mi, Baosen and Wang, Jingjing and Chen, Tianju and Ma, Xun and Liu, Ping and Li, Wei},
title = {Research Progress of High-Entropy Ceramic Films via Arc Ion Plating},
journal = {Coatings},
year = {2026},
volume = {16},
number = {1},
pages = {82},
doi = {10.3390/coatings16010082}
}
EUVIMED