Enhanced Corrosion Resistance of SUS304 Stainless Steel via Atomic Layer Deposited Al2O3/ZrO2 Nanolaminates
Coatings · 04.01.2026 · 16 (1) · 55
DOI: 10.3390/coatings16010055 ↗Kurz gefasst
Fachartikel in der Zeitschrift Coatings, online erschienen am 04.01.2026. Verfasst von Jae-Hyun Kim und 3 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 17 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Ministry of Education, National Research Foundation of Korea.
Abstract (Originalsprache)
Atomic layer deposition (ALD) was employed to fabricate single-layer Al2O3, single-layer ZrO2, and Al2O3/ZrO2 nanolaminate coatings on SUS304 to enhance corrosion protection in chloride-containing environments. All coatings were deposited at 250 °C using optimized self-limiting ALD processes, and the total film thickness was controlled at approximately 54 nm for a fair comparison. Structural characterization revealed that Al2O3 films remained amorphous, whereas ZrO2 films exhibited a thickness-dependent transition from amorphous to crystalline phases. In the nanolaminate structures, thinner ZrO2 sublayers (
Förderung
- Ministry of Education
- National Research Foundation of Korea
Zitieren
APA
Kim, J., Farithkhan, A., Jung, M., & Kwon, S. (2026). Enhanced Corrosion Resistance of SUS304 Stainless Steel via Atomic Layer Deposited Al2O3/ZrO2 Nanolaminates. Coatings, 16(1), 55. https://doi.org/10.3390/coatings16010055
Vancouver
Kim J, Farithkhan A, Jung M, Kwon S. Enhanced Corrosion Resistance of SUS304 Stainless Steel via Atomic Layer Deposited Al2O3/ZrO2 Nanolaminates. Coatings. 2026;16(1):55. doi:10.3390/coatings16010055
BibTeX
@article{Kim2026,
author = {Kim, Jae-Hyun and Farithkhan, Ameer and Jung, Myung-Jin and Kwon, Se-Hun},
title = {Enhanced Corrosion Resistance of SUS304 Stainless Steel via Atomic Layer Deposited Al2O3/ZrO2 Nanolaminates},
journal = {Coatings},
year = {2026},
volume = {16},
number = {1},
pages = {55},
doi = {10.3390/coatings16010055}
}
EUVIMED