EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Modification of Polyethylene Films in Low-Temperature Gliding Discharge Arc Plasma

Undrakh Mishigdorzhiyn, Kirill Demin, Andrei Khagleev, Oksana Ayurova, Stephan Agnaev, Saian Dondukov, Alexander Semenov, Shunqi Mei

Coatings · 19.12.2025 · 16 (1) · 2

DOI: 10.3390/coatings16010002 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Coatings, online erschienen am 19.12.2025. Verfasst von Undrakh Mishigdorzhiyn und 7 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 73 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Ministry of Science and Higher Education of the Russian Federation.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Polyethylene (PE) films are widely used as waterproofing materials on the surfaces of metal pipelines. Poor adhesion of PE films to a metal substrate reduces durability, leading to shorter service life and higher economic costs. The current research aims to study the modification of PE films in atmospheric pressure gliding arc plasma (GAP). The adhesion properties of the modified films were investigated using the contact angle method and adhesion work calculations. During the modification process, the GAP treatment duration and deflector nozzle angle of attack were optimized to 10 s and 135°, respectively. It was established that the adhesion work increased from 62.1 to 141.3 mJ/m2 after 10 s GAP modification compared to untreated PE. GAP modifying of PE films for 30 s or more is impractical, as the increase in the adhesion work ceases after that. It was found that surface roughness Rmax increased by up to 4.1 times after 10 s GAP modification compared with nontreated PE. The PE films acquired hydrophilic properties after plasma modification, due to changes in the polymer surface’s chemical structure. The results of IR spectroscopy studies indicated oxidation of the film surface, an increase in the concentration of surface polar groups (-COOH, OH, C=O), and the formation of double bonds (C=C), which led to improved adhesive properties. A study of the electret properties showed that the observed decline and subsequent stabilization of values occurred within the first 24 h. Mechanical tests indicated improved performance of the GAP-modified PE films compared to the non-treated ones in the PE–mastic–PE and PE–mastic–steel systems. Due to their enhanced contact properties, the modified PE films are of interest as a base material for creating waterproofing materials.

Förderung

  • Ministry of Science and Higher Education of the Russian Federation

Zitieren

APA

Mishigdorzhiyn, U., Demin, K., Khagleev, A., Ayurova, O., Agnaev, S., Dondukov, S., Semenov, A., & Mei, S. (2025). Modification of Polyethylene Films in Low-Temperature Gliding Discharge Arc Plasma. Coatings, 16(1), 2. https://doi.org/10.3390/coatings16010002

Vancouver

Mishigdorzhiyn U, Demin K, Khagleev A, Ayurova O, Agnaev S, Dondukov S, et al. Modification of Polyethylene Films in Low-Temperature Gliding Discharge Arc Plasma. Coatings. 2025;16(1):2. doi:10.3390/coatings16010002

BibTeX
@article{Mishigdorzhiyn2025,
  author = {Mishigdorzhiyn, Undrakh and Demin, Kirill and Khagleev, Andrei and Ayurova, Oksana and Agnaev, Stephan and Dondukov, Saian and Semenov, Alexander and Mei, Shunqi},
  title = {Modification of Polyethylene Films in Low-Temperature Gliding Discharge Arc Plasma},
  journal = {Coatings},
  year = {2025},
  volume = {16},
  number = {1},
  pages = {2},
  doi = {10.3390/coatings16010002}
}
Kostenlos starten →