EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

TEOS-Based Fiber Fabrication via Electrospinning: Influence of Process Parameters and NMC Doping on Functional Properties

Nida Tezgel, Yıldız Yaralı Özbek, Kristýna Jílková, Martin Havlík Míka, Mária Kolářová, Radovan Fojt

Coatings · 17.10.2025 · 15 (10) · 1220

DOI: 10.3390/coatings15101220 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Coatings, online erschienen am 17.10.2025. Verfasst von Nida Tezgel und 5 weiteren Autor:innen. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 46 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Sakarya University.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The main aim of this study is to produce TEOS-based fibers using the electrospinning method with solutions without carrier polymers, unlike most TEOS-based fibers that are produced with polymer additives. This study provides fundamental insights into the production and characterization of TEOS-based fibers and offers a general overview of their potential applications. We investigate the production and overlaying of their morphological, chemical, thermal, and electrochemical properties. The effects of electrospinning parameters such as voltage, flow rate, and solution viscosity on fiber morphology were examined, revealing a strong dependence of fiber diameter and structural uniformity on these parameters. Furthermore, TEOS-based fibers containing nickel–manganese–cobalt oxide (NMC) were fabricated, and their electrochemical behavior was investigated. The analyses indicate that the addition of NMC enhances the electrochemical properties of the TEOS fibers; however, the system still requires further improvement to be effective in energy-storage applications. To investigate how the flow properties of the solution affect fiber generation during electrospinning, viscosity measurements were conducted on the TEOS-based solution. Differential thermal analysis (DTA) was applied to assess the thermal behavior and stability of the fibers at elevated temperatures. The produced fibers were analyzed using various characterization techniques. As a result, thin fibers were successfully produced.

Förderung

  • Sakarya University

Zitieren

APA

Tezgel, N., Özbek, Y. Y., Jílková, K., Míka, M. H., Kolářová, M., & Fojt, R. (2025). TEOS-Based Fiber Fabrication via Electrospinning: Influence of Process Parameters and NMC Doping on Functional Properties. Coatings, 15(10), 1220. https://doi.org/10.3390/coatings15101220

Vancouver

Tezgel N, Özbek YY, Jílková K, Míka MH, Kolářová M, Fojt R. TEOS-Based Fiber Fabrication via Electrospinning: Influence of Process Parameters and NMC Doping on Functional Properties. Coatings. 2025;15(10):1220. doi:10.3390/coatings15101220

BibTeX
@article{Tezgel2025,
  author = {Tezgel, Nida and Özbek, Yıldız Yaralı and Jílková, Kristýna and Míka, Martin Havlík and Kolářová, Mária and Fojt, Radovan},
  title = {TEOS-Based Fiber Fabrication via Electrospinning: Influence of Process Parameters and NMC Doping on Functional Properties},
  journal = {Coatings},
  year = {2025},
  volume = {15},
  number = {10},
  pages = {1220},
  doi = {10.3390/coatings15101220}
}
Kostenlos starten →