EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Corrosion and Wear Behavior of 17-4PH Stainless Steel Manufactured by Selective Laser Melting and Bulk Material After Solution Treatment

Bo-Xun Hou, Hung-Hua Sheu, Ming-Yuan Lin, Chun-Ying Lee, Hung-Bin Lee

Coatings · 28.05.2025 · 15 (6) · 649

DOI: 10.3390/coatings15060649 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Coatings, online erschienen am 28.05.2025. Verfasst von Bo-Xun Hou und 4 weiteren Autor:innen. Die Arbeit wurde bisher 9-mal zitiert (Crossref) und nennt 36 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Ministry of Science and Technology, Taiwan.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study aims to investigate the wear and corrosion–wear behavior of 17-4PH stainless steel specimens, both fabricated via Selective Laser Melting (SLM) and conventional bulk material, after undergoing Solution Treatment (S.T.) in a seawater medium. Microstructural observations indicated that solution treatment contributed to a more uniform distribution of martensitic structures on the sample surface. Moreover, the solution-treated specimens exhibited improved microstructural uniformity and structural stability. SLM specimens exhibit the elimination of fine particles and scanning track traces. Based on the results of dynamic polarization tests, SLM specimens demonstrate superior corrosion resistance. However, in corrosion–wear conditions, the bulk material outperforms the SLM specimens, primarily due to the presence of pores in the latter, which are detrimental under such environments. XPS analysis of the passive film structure indicates that the passive layer is mainly composed of FeO, Cr2O3, and NiO, with the inner layer predominantly consisting of chromium oxide. The Cr2O3 layer, formed by the reaction between chromium and oxygen, significantly enhances the corrosion resistance of the material due to its extremely low chemical reactivity and high stability.

Förderung

  • Ministry of Science and Technology, Taiwan

Zitieren

APA

Hou, B., Sheu, H., Lin, M., Lee, C., & Lee, H. (2025). Corrosion and Wear Behavior of 17-4PH Stainless Steel Manufactured by Selective Laser Melting and Bulk Material After Solution Treatment. Coatings, 15(6), 649. https://doi.org/10.3390/coatings15060649

Vancouver

Hou B, Sheu H, Lin M, Lee C, Lee H. Corrosion and Wear Behavior of 17-4PH Stainless Steel Manufactured by Selective Laser Melting and Bulk Material After Solution Treatment. Coatings. 2025;15(6):649. doi:10.3390/coatings15060649

BibTeX
@article{Hou2025,
  author = {Hou, Bo-Xun and Sheu, Hung-Hua and Lin, Ming-Yuan and Lee, Chun-Ying and Lee, Hung-Bin},
  title = {Corrosion and Wear Behavior of 17-4PH Stainless Steel Manufactured by Selective Laser Melting and Bulk Material After Solution Treatment},
  journal = {Coatings},
  year = {2025},
  volume = {15},
  number = {6},
  pages = {649},
  doi = {10.3390/coatings15060649}
}
Kostenlos starten →